شيفا سانكاران غوفيندا سامي - جامعة القصيم

موقع حكومي رسمي تابع لحكومة المملكة العربية السعودية كيف تتحقق

روابط المواقع الالكترونية الرسمية التعليمية السعودية تنتهي بـ

edu.sa

جميع روابط المواقع الرسمية التعليمية التابعة للجهات الحكومية في المملكة العربية السعودية تنتهي بـ .edu.sa

المواقع الالكترونية الحكومية تستخدم بروتوكول HTTPS للتشفير و الأمان.

المواقع الالكترونية الآمنة في المملكة العربية السعودية تستخدم بروتوكول HTTPS للتشفير.

مسجل لدى هيئة الحكومة الرقمية برقم: 20260416249

أعضاء هيئة التدريس

شيفا سانكاران غوفيندا سامي

أستاذ

كلية الهندسة،

قسم هندسة ميكانيكية

البيانات الشخصية

المؤهلات العلمية

دكتوراه في الفلسفة (Ph.D.)
ماجستير في التكنولوجيا
بكالوريوس في الهندسة

الاهتمامات البحثية

المواد والتصنيع المتقدمان
المتراكبات النانوية، والسبائك الميكانيكية، وميتالورجيا المساحيق
اللحام المتقدم والطباعة ثلاثية الأبعاد
المواد المركبة ذات المصفوفة المعدنية، سبائك الإنتروبي العالي
معالجة البوليمرات والمواد المركبة

الأبحاث المنشورة

Strategic Method to Enhancing the Formability of Nitinol Foils via Micro-incremental Sheet Forming Processes and Evaluation of Structure-Property (2025-03-20)
Evaluating the metallurgical and corrosion characteristics of HVOF-sprayed Ni and Ni-TiB<sub>2</sub> coatings on duplex stainless steel (2025-02-24)
Interpretation of X-ray peak profile analysis and HRTEM morphology of mechanochemical synthesized Al-Zr-x Vol.% RE (CeO2+Y2O3) nanocomposites powders: A comparative study (2025-02-26)
Microstructural evolution and strengthening behavior of Al-Zr-(CeO<sub>2</sub> + Y<sub>2</sub>O<sub>3</sub>) hybrid nanocomposites processed by mechanical alloying and hot pressing (2025-01-28)
A comprehensive investigation on precipitation, microstructure evolution and mechanical behavior of Inconel 718 superalloy fabricated by mechanically alloying and vacuum arc melting process (2025-09-27)
Mechanical properties enhancement in composite material structures of poly-lactic acid/epoxy/milled glass fibers prepared by fused filament fabrication and solution casting (2021-10-09)
Effect of Al<sub>2</sub>O<sub>3</sub>/Y<sub>2</sub>O<sub>3</sub> in AA 7017 matrix nanocomposites on phase formation, microstructures and mechanical behavior synthesized by mechanical alloying and hot-pressing techniques (2022-01-01)
Influence of medium- and high-entropy alloy fillers on microstructures and corrosion behaviour of AA5083 plates joined by GTAW process (2024-04-25)
Influence of eutectic-Si in as-cast and fibrous-eutectic-Si in LPBF-processed AlSi10Mg alloys on wear and corrosion behaviors treated with direct aging route (2023-09-22)
Tungsten Nanoparticle Reinforced AA7055 via Friction Stir Process Route with Multi-groove Strategy (2022-09-29)
Development of 3D Printed Biodegradable Poly-lactic Acid/Polyurethane Foams/Milled Glass Fibers of Sustainable Composites with Application on Helmet (2023-05-31)
Influence of spindle speeds on the formability, microstructure, mechanical properties and fracture behaviour of Ti-6Al-4V alloy foils during single point micro incremental forming (SPMIF) process (2024-09-01)
Microstructural and Wear Behaviour of Al 6063-W Nanocomposites Developed Using Friction Stir Processing (2021-06-09)
Microstructural and Wear Behaviour of Al 6063-W Nanocomposites Developed Using Friction Stir Processing (Jul, 10.1007/s12540-021-01029-z, 2021) (2021-08-10)
Comprehensive Study on the Microstructural Characterization and Strengthening Mechanism of (α plus β) Based Ti-6Al-7Nb Alloy Processed Via Mechanical Alloying and Spark Plasma Sintering (2024-07-11)
Influence of Strain Rate and Percentage of Cold Work on Room-Temperature Deformation Behaviour of AISI 1015 Carbon Steel: Detailed Microstructures and Cold Workability Map Investigations (2020-02-24)
Low-Velocity Impact Characteristics of 3D-Printed Poly-Lactic Acid Thermoplastic Processed by Fused Deposition Modeling (2020-04-15)
Formation of FeCrMoVC Layers on AA6061 by Laser Cladding Process: Microstructure and Wear Characteristics (2020-06-01)
Appraisal of tribological properties of A356 with 20% SiC composites under dry sliding condition (2020-02-25)
EVALUATION OF MICROSTRUCTURES, MECHANICAL AND DRY-SLIDING WEAR PERFORMANCE OF A356-(FLY ASH/SICP) HYBRID COMPOSITES (2022-01-13)
Improving Mechanical and Tribological Characteristics of Cast Elektron 21 Alloy by Reinforcing its Surface with Al<sub>0.3</sub>Cu<sub>0.3</sub>Ni<sub>0.1</sub>Si<sub>0.1</sub>W<sub>0.2</sub> High Entropy Alloy via Friction Stir Processing Route (2024-07-30)
Comparative study of laser melting and pre-placed Ni-20% Cr alloying over nodular iron surface (2020-03-01)
Influence of heat treatment on the mechanical and tribological properties of Incoloy 800H Superalloy (2021-03-08)
A comprehensive exploration on the development of nano Y<sub>2</sub>O<sub>3</sub> dispersed in AA 7017 by mechanical alloying and hot-pressing technique (2021-07-13)
Structure and mechanical properties of in-situ synthesized a-Ti/TiO<sub>2</sub>/TiC hybrid composites through mechanical milling and spark plasma sintering (2022-03-16)
Evolution of microstructure and mechanical properties of [Cu-10Ni]-Si<sub>3</sub>N<sub>4</sub> nanocomposites developed using mechanical alloying and spark plasma sintering (2021-12-21)
Effect of microstructural evolution during melt pool formation on nano-mechanical properties in LPBF based SS316L parts (2023-11-11)
An exploration on microstructural observation and mechanical behavior of nanocrystallite Al 7017 alloy via mechanical alloying and uniaxial hot pressing (2021-01-01)
Microstructural evolutions and mechanical properties enhancement of AA 6063 alloy reinforced with Tungsten (W) nanoparticles processed by friction stir processing (2021-01-18)
Investigations on work hardening behaviour and relative slip distance in GTA welded AA 6063 plates using AA 5356-TiB2 filler rod (2022-10-13)
Metallurgical enhancement and mechanical performance of GTAW of AA5083 plates using medium and high-entropy fillers (2023-07-15)
Effect of martensitic phase formation on the nano-mechanical attributes during the electron beam melting process of Ti-6Al-4V (2023-12-23)
A comparative study on X-ray peak broadening analysis of mechanically alloyed Al<sub>2</sub>O<sub>3</sub> particles dispersion strengthened Al 7017 alloy (2022-11-19)
Influence of microstructural refinement on cold deformation behavior of nanocrystalline Al-Zn-Mg alloy processed by solid-state mechanical milling and hot pressing (2023-10-09)
Effect of boron carbide addition on strengthening mechanisms, cold workability and instantaneous strain hardening behaviour of Cu4Si14Zn nanocomposites (2020-06-10)
Enhancement of tensile strength in AA 6061-T6 plates joined by gas tungsten arc welding using high entropy alloy filler sheet (2022-01-14)
Evolution of Co2Nb Laves phase and deformation twins in novel CoCrFeNiCuNb eutectic high entropy alloy (2024-01-10)
Grain refinement and mechanical properties enhancement on inclusion of Al2O3 in AA 7017 alloy synthesized by mechanical alloying (MA) and hot pressing (HP) (2022-10-28)
Synergetic effect of piled-up material around the nanoindentation cavity on additively manufactured Cu-Cr-Zr alloy (2023-12-06)
Synthesis, characterization, and mechanical behavior of ultra-fine-grained Ti-6Al-5V alloy prepared by mechanical alloying and spark plasma sintering (2024-03-01)
Low-velocity impact performance of 3D-printed PLA/Epoxy/Glass fibers of composite structures and latches (2024-06-01)
Effect of SS 316, SS 304 and carbon steel electrodes on the performance of homemade electrolyzer, microstructural changes and corrosion characteristics during green hydrogen production (2024-12-19)
Investigation of infill-patterns on mechanical response of 3D printed poly-lactic-acid (2020-07-01)
Synergistic strengthening mechanism and microstructural evolution of Al-Zn-Mg-Cu/ Al2O3/Y2O3 hybrid nanocomposite via mechanical alloying and hot pressing (2024-01-09)
A novel study on mechanically alloyed nanocrystalline Ti-6Al-4V alloy fabricated by spark plasma sintering (2020-12-29)
OPTIMIZATION OF DRILLING PROCESS ON CARBON-FIBER REINFORCED PLASTICS USING GENETIC ALGORITHM (2021-03-01)
Investigating the low velocity impact response of additively manufactured tri-material composite structure with application on helmet (2024-07-30)
Effects of dry turning parameters of Incoloy 800H superalloy using Taguchi-based Grey relational analysis and modeling by response surface methodology (2021-09-26)
Silver and Silver Nanoparticles for the Potential Treatment of COVID-19: A Review (2022-11-01)
Manufacturing methods, microstructural and mechanical properties evolutions of high-entropy alloys: a review (2020-01-01)
Investigation of infill-patterns on mechanical response of 3D printed poly-lactic-acid (2020-01-01)
X-ray peak broadening analysis of AA 6061100− x− x wt.% Al2O3 nanocomposite prepared by mechanical alloying (2011-01-01)
Dry sliding wear behaviour of AA 6351-ZrB2 in situ composite at room temperature (2010-01-01)
An investigation of the synthesis, consolidation and mechanical behaviour of Al 6061 nanocomposites reinforced by TiC via mechanical alloying (2014-01-01)
An investigation on flowability and compressibility of AA 6061100− xx wt.% TiO2 micro and nanocomposite powder prepared by blending and mechanical alloying (2010-01-01)
Investigations on microstructure, mechanical, and tribological behaviour of AA 7075-x wt.% TiC composites for aerospace applications (2019-01-01)
Laser cladding process of Cobalt and Nickel based hard-micron-layers on 316L-stainless-steel-substrate (2020-01-01)
Influence of infill density on microstructure and flexural behavior of 3D printed PLA thermoplastic parts processed by fusion deposition modeling. (2019-01-01)
Synthesis, structure and sinterability of 6061 AA100− x–x wt.% TiO2 composites prepared by high-energy ball milling (2010-01-01)
Experimental design and investigation on the mechanical behavior of novel 3D printed biocompatibility polycarbonate scaffolds for medical applications (2018-01-01)
Microstructural evolutions and mechanical properties enhancement of AA 6063 alloy reinforced with Tungsten (W) nanoparticles processed by friction stir processing (2021-01-01)
Modeling and analysis of mechanical properties of aluminium alloy (A413) processed through squeeze casting route using artificial neural network model and statistical technique (2015-01-01)
Microstructural observation, consolidation and mechanical behaviour of AA 6061 nanocomposites reinforced by γ-Al2O3 nanoparticles (2015-01-01)
Modeling and analysis of mechanical properties of aluminium alloy (A413) reinforced with boron carbide (B4C) processed through squeeze casting process using artificial neural … (2017-01-01)
Fabrication and consolidation behavior of Al 6061 nanocomposite powders reinforced by multi-walled carbon nanotubes (2014-01-01)
Mechanical and Tribological Behaviour of Friction-Stir-Processed Al 6061 Aluminium Sheet Metal Reinforced with Hybrid Surface Nanocomposite (2015-01-01)
Synthesis and mechanical behavior of AA 6063-x wt.% Al2O3-1% Gr (x= 3, 6, 9 and 12 wt.%) hybrid composites (2014-01-01)
Appraisal of tribological properties of A356 with 20% SiC composites under dry sliding condition (2020-01-01)
Effect of alumina content on microstructures, mechanical, wear and machining behavior of Cu-10Zn nanocomposite prepared by mechanical alloying and hot-pressing (2017-01-01)
Taguchi-based grey relational analysis for modeling and optimizing machining parameters through dry turning of Incoloy 800H (2017-01-01)
Experimental Investigation on Mechanical and Turning Behavior of Al 7075/x% wt. TiB2‐1% Gr In Situ Hybrid Composite (2015-01-01)
Analysis of workability behavior of Al–SiC P/M composites using backpropagation neural network model and statistical technique (2009-01-01)
Evaluation of microstructures, mechanical and dry-sliding wear performance of A356-(Fly Ash/SiCp) hybrid composites (2022-01-01)
Evaluation of compaction equations and prediction using adaptive neuro-fuzzy inference system on compressibility behavior of AA 6061100− x–x wt.% TiO2 nanocomposites prepared … (2011-01-01)
Modelling of wrinkling in deep drawing of different grades of annealed commercially pure aluminium sheets when drawn through a conical die using artificial neural network (2009-01-01)
Microstructural evolutions and enhanced mechanical performance of novel Al-Zn die-casting alloys processed by squeezing and hot extrusion (2021-01-01)
Nanocomposites-Recent Evolutions (2018-01-01)
Optimising biogas from food waste using a neural network model (2017-01-01)
Effect of microstructural evolution during melt pool formation on nano-mechanical properties in LPBF based SS316L parts (2024-01-01)
Microstructure and Mechanical Properties Investigation on Nanostructured Nickel 200 Alloy Using Multi-Axial Forging (2017-01-01)
Strengthening Mechanisms on (Cu–10Zn)100−x–x wt% Al2O3 (x = 0, 3, 6, 9 and 12) Nanocomposites Prepared by Mechanical Alloying and Vacuum Hot Pressing: Influence of … (2017-01-01)
Effect of Direct Aging on the Microstructure and Mechanical Behavior of AlSi10Mg Alloy: Casting Versus Selective Laser Melting (2022-01-01)
Optimization of WEDM process parameters by RSM in machining of stir cum squeeze cast A413–B4C composites (2020-01-01)
Investigations on effect of process parameters of electrodeposited Ni-Al2O3 composite coating using orthogonal array approach and mathematical modeling (2016-01-01)
Microstructure, cold workability and strain hardening behavior of trimodaled AA 6061–TiO2 nanocomposite prepared by mechanical alloying (2011-01-01)
Effect of strengthening mechanisms on cold workability and instantaneous strain hardening behavior during grain refinement of AA 6061-10 wt.% TiO2 composite prepared by … (2010-01-01)
Low-velocity impact characteristics of 3D-printed poly-lactic acid thermoplastic processed by fused deposition modeling (2020-01-01)
Synthesis, Microstructures and Mechanical Behaviour of Cr0.21Fe0.20Al0.41Cu0.18 and Cr0.14Fe0.13Al0.26Cu0.11Si0.25Zn0.11 Nanocrystallite … (2021-01-01)
Effect of nose radius and graphite addition on turning of AA 7075-ZrB2 in-situ composites (2014-01-01)
Microstructural and wear behaviour of Al 6063–W nanocomposites developed using friction stir processing (2021-01-01)
Mechanical properties enhancement in composite material structures of poly-lactic acid/epoxy/milled glass fibers prepared by fused filament fabrication and solution casting (2021-01-01)
Efect of TiB2/Gr Hybrid Reinforcements in Al 7075 Matrix on Sliding Wear Behavior Analyzed by Response Surface Methodology (2019-01-01)
Optimization of turning parameters of machining incoloy 800H superalloy using cryogenically treated multilayer CVD-coated tool (2018-01-01)
Effect of graphite particles in drilling of hybrid aluminum matrix composite (2014-01-01)
Silver and silver nanoparticles for the potential treatment of COVID-19: A review (2022-01-01)
Investigation of the microstructure and compressibility of biodegradable Fe-Mn-Cu/W/Co nanostructured alloy powders synthesized by mechanical alloying (2021-01-01)
Experimental investigation on synthesis and structural characterization of Cu-Zn-x wt% Al2O3 (x= 0, 3, 6, 9 & 12%) nanocomposites powders through mechanical alloying (2016-01-01)
Nanocomposites: Recent Evolutions (2019-01-01)
Multi-objective optimization of EDM parameters using grey relational analysis for titanium alloy (Ti–6Al–4V) (2014-01-01)
Influence of eutectic‑Si in as‑cast and fibrous‑eutectic‑Si in LPBF‑processed AlSi10Mg alloys on wear and corrosion behaviors treated with direct aging route (2023-01-01)
A comprehensive exploration on the development of nano Y2O3 dispersed in AA 7017 by mechanical alloying and hot-pressing technique (2021-01-01)
Effect of boron carbide nano particles in CuSi4Zn14 silicone bronze nanocomposites on matrix powder surface morphology and structural evolution via mechanical alloying (2019-01-01)
Aluminium Alloys - Recent Trends in Processing, Characterization, Mechanical Behavior and Applications (2017-01-01)
Influence of Oxide Dispersions (Al2O3, TiO2, and Y2O3) in CrFeCuMnNi High-Entropy Alloy on Microstructural Changes and Corrosion Resistance (2023-01-01)
Enhancing the tribological properties of nodular cast iron using multi wall carbon nano-tubes (MWCNTs) as lubricant additives (2019-01-01)
Metallurgical enhancement and mechanical performance of GTAW of AA5083 plates using medium and high-entropy fillers (2023-01-01)
Evolution of microstructure and mechanical properties of [Cu–10Ni]–Si3N4 nanocomposites developed using mechanical alloying and spark plasma sintering (2022-01-01)
Synthesis, structure, and mechanical response of Cr0. 26Fe0. 24Al0. 5 and Cr0. 15Fe0. 14Al0. 30Cu0. 13Si0. 28 nanocrystallite entropy alloys (2020-01-01)
A comparative study on X-ray peak broadening analysis of mechanically alloyed Al2O3 particles dispersion strengthened Al 7017 alloy (2023-01-01)
Structure and mechanical properties of in-situ synthesized α-Ti/TiO2/TiC hybrid composites through mechanical milling and spark plasma sintering (2022-01-01)
Comparative study of laser melting and pre-placed Ni–20% Cr alloying over nodular iron surface (2020-01-01)
Evaluating the metallurgical and corrosion characteristics of HVOF-sprayed Ni and Ni-TiB2 coatings on duplex stainless steel (2025-01-01)
Evolution of Co2Nb Laves phase and deformation twins in novel CoCrFeNiCuNb eutectic high entropy alloy (2024-01-01)
An exploration on microstructural observation and mechanical behavior of nanocrystallite Al 7017 alloy via mechanical alloying and uniaxial hot pressing (2021-01-01)
Effect of boron carbide addition on strengthening mechanisms, cold workability and instantaneous strain hardening behaviour of Cu4Si14Zn nanocomposites (2020-01-01)
Influence of B4C nanoparticles on mechanical behaviour of Silicon brass nanocomposite through mechanical alloying and hot pressing (2019-01-01)
Effect of process parameters in surface roughness during turning of GFRP pipes using PCD insert tool (2014-01-01)
Investigation on A356-20wt% SiC composites through mechanical stirring and ultra-sonic-assisted cavitation (2019-01-01)
Enhancement of tensile strength in AA 6061-T6 plates joined by gas tungsten arc welding using high entropy alloy filler sheet (2022-01-01)
Formation of FeCrMoVC layers on AA6061 by laser cladding process: microstructure and wear characteristics (2020-01-01)
Low-velocity impact performance of 3D-printed PLA/Epoxy/Glass fibers of composite structures and latches (2024-01-01)
Influence of medium-and high-entropy alloy fillers on microstructures and corrosion behaviour of AA5083 plates joined by GTAW process (2024-01-01)
Evaluation of the biocompatibility, antibacterial and anticancer effects of a novel nano-structured Fe–Mn-based biodegradable alloys in-vitro study (2023-01-01)
Influence of Milling Time and Ball-to-Powder Ratio on Mechanical Behavior of FeMn30Cu5 Biodegradable Alloys Prepared by Mechanical Alloying and Hot-Forging (2022-01-01)
Effects of dry turning parameters of Incoloy 800H superalloy using Taguchi-based Grey relational analysis and modeling by response surface methodology (2021-01-01)
Optimization of drilling process on carbon-fiber reinforced plastics using genetic algorithm (2021-01-01)
Synthesis, microstructural investigation and compaction behavior of Al0. 3CrFeNiCo0. 3Si0. 4 nanocrystalline high entropy alloy (2021-01-01)
Investigation of element migration from aluminum cooking pots using ICP-MS (2023-01-01)
Structural characterization and mechanical behaviour of Al 6061 nanostructured matrix reinforced with TiO2 nano-particles for automotive applications (2016-01-01)
Synergistic strengthening mechanism and microstructural evolution of Al-Zn-Mg-Cu/Al2O3/Y2O3 hybrid nanocomposite via mechanical alloying and hot pressing (2024-01-01)
Developing improved corrosion-resistant AA5083—BN/WC composites for tribological applications (2023-01-01)
Tungsten Nanoparticle Reinforced AA7055 via Friction Stir Process Route with Multi-groove Strategy (2022-01-01)
Mechanical and dry sliding wear behavior of Al6063/Al2O3/Graphite hybrid composites (2014-01-01)
Effect of Graphite addition on surface roughness during turning of AA 7075-ZrB2 in-situ metal matrix composites (2014-01-01)
Effect of martensitic phase formation on the nano-mechanical attributes during the electron beam melting process of Ti-6Al-4V (2024-01-01)
Effect of Al2O3 (x = 0, 1, 2, and 3 vol.%) in CrFeCuMnNi-x High-Entropy Alloy Matrix Composites on their Microstructure and Mechanical and Wear Performance (2023-01-01)
Optimization on dry sliding wear behavior of yellow brass using face centered composite design. (2019-01-01)
Heat treatment effect on CNC turning of Incoloy 800H superalloy (2018-01-01)
Experimental investigation and multi-response optimization in turning of Incoloy 800H superalloy (2018-01-01)
Influence of V and Zn in FeCrCuMnTi high-entropy alloys on microstructures and uniaxial compaction behavior prepared by mechanical alloying (2021-01-01)
Effect of coarse grain matrix content on the mechanical behavior of trimodaled AA 6061-TiO2 nanocomposite prepared by mechanical alloying (2015-01-01)
Comprehensive study on the microstructural characterization and strengthening mechanism of (α+ β) based Ti-6Al-7Nb alloy processed via mechanical alloying and spark plasma … (2025-01-01)
Influence of spindle speeds on the formability, microstructure, mechanical properties and fracture behaviour of Ti-6Al-4V alloy foils during single point micro incremental … (2024-01-01)
Synthesis, characterization, and mechanical behavior of ultra-fine-grained Ti-6Al-5V alloy prepared by mechanical alloying and spark plasma sintering (2024-01-01)
Synergetic effect of piled-up material around the nanoindentation cavity on additively manufactured Cu-Cr-Zr alloy (2024-01-01)
Synthesis, Microstructures, Mechanical, and Corrosion Behavior of FeMn(35?x)–x (Cu, W, and Co)-Based Biodegradable Alloys Prepared by Mechanical Alloying and Selective Laser … (2023-01-01)
Enhanced microstructure and mechanical properties of AZ31 magnesium alloy joints using rare earth enriched filler produced by GTAW (2025-01-01)
Improving Mechanical and Tribological Characteristics of Cast Elektron 21 Alloy by Reinforcing its Surface with Al0.3Cu0.3Ni0.1Si0.1W0.2 High Entropy Alloy … (2025-01-01)
Synthesis, characterization, thermal and mechanical behavior of polypropylene hybrid composites embedded with CaCO3 and graphene nano-platelets (GNPs) for … (2024-01-01)
Investigations on work hardening behaviour and relative slip distance in GTA welded AA 6063 plates using AA 5356-TiB2 filler rod (2022-01-01)
Manufacturing of (Al–10Zn)/TiB2 in-situ nanocomposites by reactive liquid metallurgy and hot-extrusion for enhanced interfacial bonding and mechanical properties (2022-01-01)
Continuous hot-compaction behavior of nanostructured FeCrCuMnTi-(V, Zn) high-entropy alloys (2022-01-01)
Influence of heat treatment on the mechanical and tribological properties of Incoloy 800H Superalloy (2021-01-01)
Influence of Strain Rate and Percentage of Cold Work on Room-Temperature Deformation Behaviour of AISI 1015 Carbon Steel: Detailed Microstructures and Cold Workability Map … (2020-01-01)
Cold deformation of dezincification resistant yellow brass for plumbing applications (2018-01-01)
Functionalized nanomaterials (2016-01-01)
Microstructure, mechanical properties, and corrosion behavior of Zn-x wt.% Ti (x= 0, 0.3 and 1) alloys for biomedical applications (2025-01-01)
Development of 3D printed biodegradable poly-lactic acid/polyurethane foams/milled glass fibers of sustainable composites with application on helmet (2023-01-01)
A novel study on mechanically alloyed nanocrystalline Ti-6Al-4V alloy fabricated by spark plasma sintering (2020-01-01)
CFD analysis for homogenous effect of biogas and air in the intake manifold of dual fuel CI engine (2016-01-01)
Microstructural evolution and enhanced mechanical performance of dissimilar CoCrFeMnNi High Entropy Alloy-Duplex Stainless Steel welds using laser beam welding (2025-01-01)
Effect of Al2O3/Y2O3 in AA 7017 matrix nanocomposites on phase formation, microstructures and mechanical behavior synthesized by mechanical alloying and … (2022-01-01)
Synthesis, phase evolutions, microstructures, and compaction behavior of four copper-chalcogenide micron-thermoelectric powders (Cu2ZnSnS4/Se4, Cu2MnSiS4/Se4, Cu2MnSnS4/Se4 … (2021-01-01)
Investigations on the microstructure and mechanical property of friction stir processed AA6061 aluminium sheet metal reinforced with Al2O3 surface composite (2014-01-01)
Influence of heating temperature and time on mechanical-degradation, microstructures and corrosion performances of Teflon/granite coated aluminum alloys used for non-stick cookware (2024-01-01)
Microstructural evolutions, hot deformation and work hardening behaviour of novel Al–Zn binary alloys processed by squeezing and hot extrusion (2022-01-01)
Shore hardness characterization of FDM printed PLA/Epoxy/MGFs composite material structure (2022-01-01)
The influence of ball milling processing variables on the microstructure and compaction behavior of Fe–Mn–Cu alloys (2021-01-01)
OPTIMIZATION AND ANALYSIS OF DRY SLIDING WEAR BEHAVIOR OF STIR CASTED AlSi6Cu4–TiO2 COMPOSITE USING CENTRAL COMPOSITE DESIGN (2019-01-01)
Unveiling insights of sustainable tetra metal nanocrystallite chalcogenide thin film grown on IDE as a novel material for temperature sensing (2026-03-01)
Comparative evaluation of microstructure, mechanical properties, and strengthening mechanisms in cast and selective laser melted AlSi10Mg alloys with direct aging treatment (2026-04-24)
Evaluation of Mechanical and Tribological Performances of MWCNTs and Gr Particles Addition on the A360 Aluminum Alloy Produced Through Stir Casting Method (2026-01-21)
Laser cladding process of Cobalt and Nickel based hard-micron-layers on 316L-stainless-steel-substrate (2019-11-17)
Influence of B<sub>4</sub>C nanoparticles on mechanical behaviour of Silicon brass nanocomposite through mechanical alloying and hot pressing (2019-10-15)
Investigation on A356-20wt%SiC composites through mechanical stirring and ultra-sonic-assisted cavitation (2019-09-01)
Investigations on microstructure, mechanical, and tribological behaviour of AA 7075-x wt.% TiC composites for aerospace applications (2019-03-01)
Enhancing the tribological properties of nodular cast iron using multi wall carbon nano-tubes (MWCNTs) as lubricant additives (2019-04-01)
Effect of boron carbide nano particles in CuSi<sub>4</sub>Zn<sub>14</sub> silicone bronze nanocomposites on matrix powder surface morphology and structural evolution via mechanical alloying (2019-02-15)
EXPERIMENTAL INVESTIGATION AND MULTI-RESPONSE OPTIMIZATION IN TURNING OF INCOLOY 800 H SUPERALLOY (2018-01-01)
Experimental design and investigation on the mechanical behavior of novel 3D printed biocompatibility polycarbonate scaffolds for medical applications (2018-10-01)
Heat treatment effect on CNC turning of Incoloy 800H superalloy (2018-01-01)
Cold deformation of dezincification resistant yellow brass for plumbing applications (2018-01-01)
Optimization of Turning Parameters of Machining Incoloy 800H Superalloy Using Cryogenically Treated Multilayer CVD-Coated Tool (2018-09-01)
Microstructure and mechanical properties investigation on nanostructured Nickel 200 alloy using multi-axial forging (2018-01-18)
Optimising biogas from food waste using a neural network model (2017-12-01)
Taguchi-based grey relational analysis for modeling and optimizing machining parameters through dry turning of Incoloy 800H (2017-09-01)
Modeling and Analysis of Mechanical Properties of Aluminium Alloy (A413) Reinforced with Boron Carbide (B<sub>4</sub>C) Processed Through Squeeze Casting Process Using Artificial Neural Network Model and Statistical Technique (2017-01-01)
Effect of alumina content on microstructures, mechanical, wear and machining behavior of Cu-10Zn nanocomposite prepared by mechanical alloying and hot-pressing (2017-06-30)
Strengthening Mechanisms on (Cu-10Zn)<sub>100-x</sub>-x wt% Al<sub>2</sub>O<sub>3</sub> (x=0, 3, 6, 9 and 12) Nanocomposites Prepared by Mechanical Alloying and Vacuum Hot Pressing: Influence of Reinforcement Content (2017-04-01)
Catalytic etherification of glycerol to <i>tert</i>-butyl glycerol ethers using <i>tert</i>-butanol over sulfonic acid functionalized mesoporous polymer (2016-01-01)
Experimental investigation on synthesis and structural characterization of Cu-Zn-x wt%Al<sub>2</sub>O<sub>3</sub> (x=0, 3, 6, 9 & 12%) nanocomposites powders through mechanical alloying (2016-12-15)
Investigations on effect of process parameters of electrodeposited Ni-Al<sub>2</sub>O<sub>3</sub> composite coating using orthogonal array approach and mathematical modeling (2016-01-01)
Experimental Investigation on Mechanical and Turning Behavior of Al 7075/<i>x</i>%wt. TiB<sub>2</sub>-1% Gr In Situ Hybrid Composite (2015-01-01)
Modeling and Analysis of Mechanical Properties of Aluminium Alloy (A413) Processed through Squeeze Casting Route Using Artificial Neural Network Model and Statistical Technique (2015-01-01)
A novel sonochemical synthesis of nano-size silicon nitride and titanium carbide (2015-11-01)
Effect of coarse grain matrix content on the mechanical behavior of trimodaled AA 6061-TiO<sub>2</sub> nanocomposite prepared by mechanical alloying (2015-04-01)
Microstructural observation, consolidation and mechanical behaviour of AA 6061 nanocomposites reinforced by γ-Al<sub>2</sub>O<sub>3</sub> nanoparticles (2015-01-01)
Multi-Objective Optimization of EDM Parameters Using Grey Relational Analysis for Titanium Alloy (Ti-6Al-4V) (2014-01-01)
Mechanical and Tribological Behaviour of Friction-Stir-Processed Al 6061 Aluminium Sheet Metal Reinforced with Hybrid Surface Nanocomposite (2015-02-01)
Fabrication and consolidation behavior of Al 6061 nanocomposite powders reinforced by multi-walled carbon nanotubes (2014-05-01)
An investigation of the synthesis, consolidation and mechanical behaviour of Al 6061 nanocomposites reinforced by TiC via mechanical alloying (2014-05-01)
Effect of Graphite addition on surface roughness during turning of AA 7075-ZrB<sub>2</sub>in-situ metal matrix composites (2014-01-01)
Synthesis and mechanical behavior of AA 6063-x wt. % Al<sub>2</sub>O<sub>3</sub>-1% Gr (x=3, 6, 9 and 12 wt. %) hybrid composites (2014-01-01)
Effect of graphite particles in drilling of hybrid aluminum matrix composite (2014-01-01)
Effect of nose radius and graphite addition on turning of AA 7075-ZrB<sub>2</sub> in-situ composites (2014-01-01)
Effect of process parameters in surface roughness during turning of GFRP pipes using PCD insert tool (2014-01-01)
Microstructure, cold workability and strain hardening behavior of trimodaled AA 6061-TiO<sub>2</sub> nanocomposite prepared by mechanical alloying (2011-08-25)
X-ray peak broadening analysis of AA 6061<sub>100-x</sub>-x wt.% Al<sub>2</sub>O<sub>3</sub> nanocomposite prepared by mechanical alloying (2011-07-01)
Evaluation of compaction equations and prediction using adaptive neuro-fuzzy inference system on compressibility behavior of AA 6061<sub>100-x</sub>-x wt.% TiO<sub>2</sub> nanocomposites prepared by mechanical alloying (2011-05-15)
Effect of strengthening mechanisms on cold workability and instantaneous strain hardening behavior during grain refinement of AA 6061-10 wt.% TiO<sub>2</sub> composite prepared by mechanical alloying (2010-09-24)
An investigation on flowability and compressibility of AA 6061<sub>100-<i>x</i></sub>-<i>x</i> wt.% TiO<sub>2</sub> micro and nanocomposite powder prepared by blending and mechanical alloying (2010-07-12)
Dry sliding wear behaviour of AA 6351-ZrB<sub>2</sub> in situ composite at room temperature (2010-03-01)
Synthesis, structure and sinterability of 6061 AA<sub>100-<i>x</i></sub>-<i>x</i> wt.% TiO<sub>2</sub> composites prepared by high-energy ball milling (2010-02-18)
Analysis of workability behavior of Al-SiC P/M composites using backpropagation neural network model and statistical technique (2009-11-01)
Modelling of wrinkling in deep drawing of different grades of annealed commercially pure aluminium sheets when drawn through a conical die using artificial neural network (2009-09-01)
OPTIMIZATION AND ANALYSIS OF DRY SLIDING WEAR BEHAVIOR OF STIR CASTED AlSi<sub>6</sub>Cu<sub>4</sub>-TiO<sub>2</sub> COMPOSITE USING CENTRAL COMPOSITE DESIGN (2019-11-01)
Investigation of Element Migration from Aluminum Cooking Pots Using ICP-MS (2023-12-01)
Effect of Al<sub>2</sub>O<sub>3</sub> (x=0, 1, 2, and 3 vol.%) in CrFeCuMnNi-x High-Entropy Alloy Matrix Composites on their Microstructure and Mechanical and Wear Performance (2023-05-11)
Synthesis, Microstructure Investigation, Mechanical and Tribological Behaviour of the AA5083-WC Composite (2023-04-01)
Influence of Oxide Dispersions (Al<sub>2</sub>O<sub>3</sub>, TiO<sub>2</sub>, and Y<sub>2</sub>O<sub>3</sub>) in CrFeCuMnNi High-Entropy Alloy on Microstructural Changes and Corrosion Resistance (2023-04-01)
Developing Improved Corrosion-Resistant AA5083-BN/WC Composites for Tribological Applications (2023-02-01)
Influence of Milling Time and Ball-to-Powder Ratio on Mechanical Behavior of FeMn<sub>30</sub>Cu<sub>5</sub> Biodegradable Alloys Prepared by Mechanical Alloying and Hot-Forging (2022-12-01)
Microstructure, mechanical, impact resistance, and wear behavior of vacuum induction melted Zn-Zr-Ti intermetallic alloys (2026-05-01)
Comparative analysis of regression and enhanced label propagation approaches for predicting airborne dust particle levels in environmental data (vol 17, 103984, 2026) (2026-04-01)
Comparative analysis of regression and enhanced label propagation approaches for predicting airborne dust particle levels in environmental data (2026-01-23)
Microstructural evolution and enhanced mechanical performance of dissimilar CoCrFeMnNi high entropy alloy-duplex stainless steel welds using laser beam welding (vol 36, pg 4985, 2025) (2025-11-14)
Microstructure, mechanical properties, and corrosion behavior of Zn-x wt. % Ti (x = 0, 0.3 and 1) alloys for biomedical applications (vol 36, pg 4968, 2025) (2025-11-14)
Influence of date-palm-fibers (DPFs) content and nanocrystallite FeCrCuMnTi high-entropy alloy fillers in polypropylene matrix on mechanical and structural performance of thermoplastic composite materials (2025-08-25)
Synthesis, microstructural evolution, and compaction behavior of Mg<sub>30</sub>-Al<sub>25</sub>-Ti<sub>25</sub>-Li<sub>15</sub>-Si<sub>5</sub> lightweight high-entropy alloys synthesized via mechanical alloying (2025-03-01)
Osteogenic potential of nanostructured Cu/W/Co in Fe-Mn alloys designed for maxillofacial applications: in vivo study in dog model (2025-06-25)
Microstructural evolution and enhanced mechanical performance of dissimilar CoCrFeMnNi high entropy alloy-duplex stainless steel welds using laser beam welding (2025-04-22)
Microstructure, mechanical properties, and corrosion behavior of Zn-x wt. % Ti (x=0, 0.3 and 1) alloys for biomedical applications (2025-04-22)
Influence of heating temperature and time on mechanical-degradation, microstructures and corrosion performances of Teflon/granite coated aluminum alloys used for non-stick cookware (2024-07-20)
Evaluation of the biocompatibility, antibacterial and anticancer effects of a novel nano-structured Fe-Mn-based biodegradable alloys in-vitro study (2023-10-23)
Synthesis, Microstructures, Mechanical, and Corrosion Behavior of FeMn<sub>(35-<i>x</i>)</sub>-<i>x</i> (Cu, W, and Co)-Based Biodegradable Alloys Prepared by Mechanical Alloying and Selective Laser Melting (2023-07-28)
Manufacturing of (Al-10Zn)/TiB<sub>2</sub> in-situ nanocomposites by reactive liquid metallurgy and hot-extrusion for enhanced interfacial bonding and mechanical properties (2022-10-29)
Influence of V and Zn in FeCrCuMnTi High-Entropy Alloys on Microstructures and Uniaxial Compaction Behavior Prepared by Mechanical Alloying (2021-11-01)
The influence of ball milling processing variables on the microstructure and compaction behavior of Fe-Mn-Cu alloys (2021-09-01)
Continuous hot-compaction behavior of nanostructured FeCrCuMnTi-(V, Zn) high-entropy alloys (2021-11-27)
Synthesis, phase evolutions, microstructures, and compaction behavior of four copper-chalcogenide micron-thermoelectric powders (Cu<sub>2</sub>ZnSnS<sub>4</sub>/Se<sub>4</sub>, Cu<sub>2</sub>MnSiS<sub>4</sub>/Se<sub>4</sub>, Cu<sub>2</sub>MnSnS<sub>4</sub>/Se<sub>4</sub>, and Cu<sub>2</sub>ZnSiS<sub>4</sub>/Se<sub>4</sub>) prepared by mechanical alloying (2021-07-08)
Investigation of the Microstructure and Compressibility of Biodegradable Fe-Mn-Cu/W/Co Nanostructured Alloy Powders Synthesized by Mechanical Alloying (2021-06-01)
Microstructural Evolutions, Hot Deformation and Work Hardening Behaviour of Novel Al-Zn Binary Alloys Processed by Squeezing and Hot Extrusion (2021-03-25)
Microstructural evolutions and enhanced mechanical performance of novel Al-Zn die-casting alloys processed by squeezing and hot extrusion (2021-02-02)
Manufacturing Methods, Microstructural and Mechanical Properties Evolutions of High-Entropy Alloys: A Review (2020-08-01)
Synthesis, structure, and mechanical response of Cr<sub>0.26</sub>Fe<sub>0.24</sub>Al<sub>0.5</sub> and Cr<sub>0.15</sub>Fe<sub>0.14</sub>Al <sub>0.30</sub>Cu<sub>0.13</sub>Si<sub>0.28</sub> nanocrystallite entropy alloys (2020-05-01)
Synthesis, Microstructures and Mechanical Behaviour of Cr<sub>0.21</sub>Fe<sub>0.20</sub>Al<sub>0.41</sub>Cu<sub>0.18</sub> and Cr<sub>0.14</sub>Fe<sub>0.13</sub>Al<sub>0.26</sub>Cu<sub>0.11</sub>Si<sub>0.25</sub>Zn<sub>0.11</sub> Nanocrystallite Entropy Alloys Prepared by Mechanical Alloying and Hot-Pressing (2020-03-13)
Prediction of road marking paint retro-reflectivity using novel multi-layer perceptron-integrated quantum harmonic spline Gaussian and fuzzy tree wavelet nonlinear regression framework (2026-10-01)
Influence of TiC addition on the surface roughness during turning of AA 7075 alloy processed through stir-casting (2018-01-01)
Study of mechanical and machining behavior of AA7075-3% TiB2 in situ composite (2014-01-01)
A comprehensive investigation on precipitation, microstructure evolution and mechanical behavior of Inconel 718 superalloy fabricated by mechanically alloying and vacuum arc … (2025-01-01)
Synthesis, Microstructure Investigation, Mechanical and Tribological Behaviour of the AA5083–WC Composite (2023-01-01)
Solid State PhysicsMetastable, Spintronics Materials and Mechanics of Deformable Bodies: Recent Progress (2020-01-01)
Multiscale modeling and simulation of 3D effective homogenization for material properties of graphene nano-platelets reinforced in Al7050 matrix composite homogenization for … (2020-01-01)
Influence of date-palm-fibers (DPFs) content and nanocrystallite FeCrCuMnTi high-entropy alloy fillers in polypropylene matrix on mechanical and structural performance of … (2026-01-01)
Microstructural and electrochemical behavior of spark plasma sintered (Cu-10Zn)+ Al2O3 nanocomposites (2023-01-01)
Mathematical modeling (Buckingham’s π Theorem) and optimization technique on mechanically alloyed nanocomposite materials (2020-01-01)
Comparative evaluation of microstructure, mechanical properties, and strengthening mechanisms in cast and selective laser melted AlSi10Mg alloys with direct aging treatment (2026-01-01)
Evaluation of mechanical and tribological performances of MWCNTs and Gr particles addition on the A360 aluminum alloy produced through stir casting method (2026-01-01)
Interpretation of X-ray peak profile analysis and HRTEM morphology of mechanochemical synthesized Al-Zr-x Vol.% RE (CeO2+ Y2O3) nanocomposites powders: A comparative study (2025-01-01)
Synthesis, microstructural investigation, and mechanical behavior of AA5083/boron nitride nanocomposite (2025-01-01)
Synthesis, microstructural evolution, and compaction behavior of Mg30-Al25-Ti25-Li15-Si5 lightweight high-entropy alloys synthesized via mechanical alloying (2025-01-01)
Effect of SS 316, SS 304 and carbon steel electrodes on the performance of homemade electrolyzer, microstructural changes and corrosion characteristics during green hydrogen … (2025-01-01)
Grain refinement and mechanical properties enhancement on inclusion of Al2O3 in AA 7017 alloy synthesized by mechanical alloying (MA) and hot pressing (HP) (2022-01-01)
Non-Traditional machining process of composite materials using renewable lubricants (2020-01-01)
Synthesizing and hot deformation behavior of novel Al-X wt.% Zn alloys for advanced casting industries (2020-01-01)
Optimizing the Supercharger Effect on the Performance and Emission of Biogas Diesel Engine using ANFIS (2016-01-01)
Comparative analysis of regression and enhanced label propagation approaches for predicting airborne dust particle levels in environmental data (2026-01-01)
Unveiling Insights of sustainable tetra metal nanocrystallite chalcogenide thin film grown on IDE as a novel material for temperature sensing (2026-01-01)
Microstructural evolution and strengthening behavior of Al-Zr-(CeO2 + Y2O3) hybrid nanocomposites processed by mechanical alloying and hot pressing (2025-01-01)
Investigating the low velocity impact response of additively manufactured tri-material composite structure with application on helmet (2025-01-01)
Influence of microstructural refinement on cold deformation behavior of nanocrystalline Al–Zn–Mg alloy processed by solid-state mechanical milling and hot pressing (2023-01-01)
Development of Al–Zn die-casting alloys and its flexural deformation behavior (2020-01-01)
Effect of die sleeve material on mechanical behavior of A413 aluminium alloy processed through squeeze casting route (2018-01-01)
The influences of the friction stir processing on the microstructure and hardness of Al7075 aluminium sheet metal reinforced with SiC/3%[B. sub. 4] C hybrid surface nanocomposite (2016-01-01)
Prediction of road marking paint retro-reflectivity using novel multi-layer perceptron-integrated quantum harmonic spline Gaussian and fuzzy tree wavelet nonlinear regression … (2026-01-01)
Interfacial microstructure, phase formation, and shear strength in dissimilar resistance spot welding of Al 5083 to ferrous alloys and CoCrFeMnNi-high entropy alloy using a … (2026-01-01)
Microstructure, mechanical, impact resistance, and wear behavior of vacuum induction melted Zn-Zr-Ti intermetallic alloys (2026-01-01)
Microstructural Evolution and Strengthening Behavior of Al–Zr–(CeO₂+ Y₂O₃) Hybrid Nanocomposites Processed by Mechanical Alloying and Hot Pressing (2025-01-01)
Oxide Dispersion Reinforcement for Enhanced Corrosion Resistance in CrFeCuMnNi High-Entropy Alloys (2025-01-01)
Corrigendum to ‘Microstructural evolution and enhanced mechanical performance of dissimilar CoCrFeMnNi high entropy alloy-duplex stainless steel welds using laser beam welding … (2025-01-01)
Microstructure, mechanical properties, and corrosion behavior of Zn-x wt.% Ti (x= 0, 0.3 and 1) alloys for biomedical applications (vol 36, pg 4968, 2025) (2025-01-01)
Microstructural evolution and enhanced mechanical performance of dissimilar CoCrFeMnNi high entropy alloy-duplex stainless steel welds using laser beam welding (vol 36, pg 4985 … (2025-01-01)
Strategic Method to Enhancing the Formability of Nitinol Foils via Micro-Incremental Sheet Forming Processes and Evaluation of Structure–Property (2025-01-01)
Osteogenic potential of nanostructured Cu/W/Co in Fe-Mn alloys designed for maxillofacial applications: in vivo study in dog model (2025-01-01)
Assessing Pavement Marking Durability and Retro-Reflectivity: Enabling and Engineering Factors for Road Safety–A Scoping Review (2015–2025) (2025-01-01)
Influence of graphene nanoplatelets (GNPs) and aluminum-carbon layered double hydroxides (Al-C LDH) in polypropylene matrix of hybrid composite structures on the microstructure … (2024-01-01)
Mechanical, Degradation, and Flammable Behavior of VALOX100-x—X Wt.% Polycarbonates Composite Materials for Electrical Plugs, Sockets, and Extension … (2022-01-01)
Silver and Silver Nanoparticles for the Potential Treatment of COVID-19: A Review. Coatings 2022, 12, 1679 (2022-01-01)
Experimental Investigation and Optimization of EDM Process Parameters on Ti-6Al-4V Alloy Using Taguchi-Based GRA and Modelling by RSM (2020-01-01)
Synthesis, structure, and mechanical response of Cr0. 26Fe0. 24Al0. 5 and (2020-01-01)
Corrigendum to “An investigation on flowability and compressibility of AA 6061100− x-x wt% TiO2 micro and nanocomposite powder prepared by blending and mechanical alloying … (2020-01-01)
SYNTHESIS AND MICROSTRUCTURAL CHARACTERIZATION OF CU2MNSNS4/SE4 NANO-THERMOELECTRIC MATERIAL (2020-01-01)
SYNTHESIS AND MICROSTRUCTURAL CHARACTERIZATION OF NANOSTRUCTURED HIGH ENTROPY ALLOY (2020-01-01)
Optimization of WEDM process parameters by RSM in machining of stir cum squeeze cast A413–B (2020-01-01)
Synthesis and Characterization of Cerium Doped Urea Thiourea Naphthylamine Single Crystal Developed by Slow Evaporation Method. (2017-01-01)
Al 6061 Nanostructured Matrix Reinforced with TiO₂2 Nanoparticles for Automotive Applications (2016-01-01)
Experimental Investigation of Friction Stir Processed Al7075 Aluminium Plate Reinforced with Al2O3/1% Gr Hybrid Surface Nanocomposite (2016-01-01)
Performance Testing Of Diesel Engine With Tio2coated Engine Parts (2014-01-01)
Convective heat transfer enhancement of graphite nanofluids in shell and tube heat exchanger (2014-01-01)
INFLUNCE OF MILLING TIME AND BALL-TO-POWDER RATIO OF MECHANICALLY ALLOYED Fe-35Mn-5Cu ALLOY ON PARTICLE SIZE AND GREEN DENSITY (2026-01-01)
NANOCOMPOSITES–PROCESSING AND POTENTIAL APPLICATIONS (2026-01-01)
INFLUENCE OF CARBON CONTENT ON wORKABILITY BEHAVIOR OF POwDER METALLURGY STEELS (2026-01-01)
Optimization and Prediction of Mechanical and Surface Properties in Wire Laser Metal Deposition of Ti-6Al-4V Alloy Using Hybrid Taguchi–Grey–ANN–MLR Approach (2026-01-01)
Comparison of very short-term load forecasting techniques (1996-05-01)
PHASE-STABILITY STUDIES OF BI-2212 SUPERCONDUCTOR USING THERMAL-ANALYSIS SYSTEMS (1995-06-01)
PHASE-STABILITY OF REBA(2)CU(4)O(8) [RE=Y, DY, SM] CERAMICS (1995-06-01)
SYNTHESIS AND IRREVERSIBILITY OF OXYGEN WEIGHT-LOSS IN 80-K YBA2CU4O8 SUPERCONDUCTOR (1993-01-01)
Optimization and Prediction of Mechanical and Surface Properties in Wire Laser Metal Deposition of Ti-6Al-4V Alloy Using Hybrid Taguchi-Grey-ANN-MLR Approach (2026-07-22)
Effect of TiB<sub>2</sub>/Gr Hybrid Reinforcements in Al 7075 Matrix on Sliding Wear Behavior Analyzed by Response Surface Methodology (2019-11-29)

المواد التدريسية