اسامه محمد عرفان احمد - جامعة القصيم

موقع حكومي رسمي تابع لحكومة المملكة العربية السعودية كيف تتحقق

روابط المواقع الالكترونية الرسمية التعليمية السعودية تنتهي بـ

edu.sa

جميع روابط المواقع الرسمية التعليمية التابعة للجهات الحكومية في المملكة العربية السعودية تنتهي بـ .edu.sa

المواقع الالكترونية الحكومية تستخدم بروتوكول HTTPS للتشفير و الأمان.

المواقع الالكترونية الآمنة في المملكة العربية السعودية تستخدم بروتوكول HTTPS للتشفير.

مسجل لدى هيئة الحكومة الرقمية برقم: 20260416249

أعضاء هيئة التدريس

أسامه محمد عرفان أحمد

أستاذ

كلية الهندسة،

قسم هندسة ميكانيكية

البيانات الشخصية

المؤهلات العلمية

الاهتمامات البحثية

الأبحاث المنشورة

Cost-effective sewage-powered microbial fuel cells with nitrogen-doped cobalt carbon nanofiber cathodes and biomass-derived graphitized anodes (2025-03-12)
Enhanced performance of CoNi nanoparticles-decorated activated carbon anode for direct urea fuel cells: from simulated solutions to real wastewater applications (2025-01-30)
Benefits and limitations of N<sub>2</sub> addition with Ar as shielding gas on microstructure change and their effect on hardness and corrosion resistance of duplex stainless steel weldments (2025-05-05)
Enhancing sustainability and power generation from sewage-driven air-cathode microbial fuel cells through innovative anti-biofouling spacer and biomass-derived anode (2024-10-31)
Strain uniformity footprint on mechanical performance and erosion-corrosion behavior of equal channel angular pressed pure titanium (2020-06-01)
Synthesis of TiO<sub>2</sub>-incorporated activated carbon as an effective Ion electrosorption material (2023-03-23)
TiO<sub>2</sub> NPs-immobilized silica granules: New insight for nano catalyst fixation for hydrogen generation and sustained wastewater treatment (2023-06-21)
Erosion-Corrosion Resistance and Electrochemical Behavior of AZ31 Magnesium Alloy Processed by Equal Channel Angular Pressing (ECAP) (2021-04-01)
Experimental Study of the Corrosiveness of Ternary Blends of Biodiesel Fuel (2021-11-17)
Optimization and Mapping of the Deep Drawing Force Considering Friction Combination (2021-10-01)
Effect of Semisolid and Heat Treatment Process on Microstructural Refinement of Al-7Si Alloy (2023-02-01)
Combining Heat Treatment and High-Pressure Torsion to Enhance the Hardness and Corrosion Resistance of A356 Alloy (2022-05-01)
Microstructure Refinement by a Combination of Heat Treatment and Thixoforming Process Followed by Severe Plastic Deformation and Their Effects on Al-Si Alloy Hardness (2022-11-01)
H<sub>3</sub>PO<sub>4</sub>/KOH Activation Agent for High Performance Rice Husk Activated Carbon Electrode in Acidic Media Supercapacitors (2023-01-01)
Development of Sustainable Inhibitors for Corrosion Control (2022-08-01)
The Microstructural Refinement of the A356 Alloy Using Semi-Solid and Severe Plastic-Deformation Processing (2023-11-01)
Molybdenum Carbide/Ni Nanoparticles Embedded into Carbon Nanofibers as an Effective Non-Precious Catalyst for Green Hydrogen Production from Methanol Electrooxidation (2023-05-24)
Integrating Lean Six Sigma with Sustainability Goals in Saudi Food Processing: A Case Study Using a Quantitative Framework for Measuring Sustainability Contributions and Cultural Enablers (2026-02-25)
People-Centered Lean Manufacturing: Drivers of Operational Performance in Saudi Arabian Industries (2026-02-26)
A Predict-Optimize-Evaluate Framework for Sustainable Traffic Safety Resource Allocation: LSTM Forecasting with Triangulated Enforcement Elasticity in Saudi Arabia (2026-05-25)
Post-Print Annealing of FDM-Printed Polylactic Acid: Mapping Strength, Crystallinity, and α′/α Polymorph Composition via a Replicated Taguchi L9 Design (2026-05-28)
Enhancement of Mechanical Properties of Cu-Fe-Ni-Co Medium-Entropy Alloys Reinforced With Tungsten Carbide and Graphene Nanosheets (2026-01-01)
A Cohesive-Zone-Modified Point-Stress Criterion for Notched Polymer Composites: Derivation, Calibration, and Validation (2026-05-07)
Data-Driven Design of Epoxy-Granite Machine Foundations: Bayesian Optimization for Enhanced Compressive Strength and Vibration Damping (2026-02-21)
Expression of Concern: Experimental study of the corrosiveness of ternary blends of biodiesel fuel (2024-07-02)
Effects of Self-Lubricant Coating and Motion on Reduction of Friction and Wear of Mild Steel and Data Analysis from Machine Learning Approach (2021-10-01)
Effect of nanoparticle reinforcement on mechanical properties and erosion-corrosion behavior of cast aluminum (2019-07-01)
Influence of Grain Refinement by ECAP on Mechanical and Erosion Corrosion Properties of AISI 4130 Steel: Experimental and Prediction Approach (2019-09-01)
Strain Behavior of Nickel Alloy 200 during Multiaxial Forging through Finite Element Modeling (2019-02-01)
Surface Properties and Erosion-Corrosion Behavior of Nanostructured Pure Titanium in Simulated Body Fluid (2018-11-01)
Effect of Equal Channel Angular Pressing (ECAP) on Erosion-Corrosion of Pure Copper (2017-12-01)
Surface Modelling of Nanostructured Copper Subjected to Erosion-Corrosion (2017-05-01)
Manufacturing of (Al-10Zn)/TiB<sub>2</sub> in-situ nanocomposites by reactive liquid metallurgy and hot-extrusion for enhanced interfacial bonding and mechanical properties (2022-10-29)
Microstructural Evolutions, Hot Deformation and Work Hardening Behaviour of Novel Al-Zn Binary Alloys Processed by Squeezing and Hot Extrusion (2021-03-25)
Microstructural evolutions and enhanced mechanical performance of novel Al-Zn die-casting alloys processed by squeezing and hot extrusion (2021-02-02)
Microstructure and mechanical properties investigation on nanostructured Nickel 200 alloy using multi-axial forging (2018-01-18)
Surface Roughness Investigation and Stress Modeling by Finite Element on Orthogonal Cutting of Copper (2018-06-01)
Development of Sustainable Inhibitors for Corrosion Control (2022-01-01)
H3PO4/KOH Activation Agent for High Performance Rice Husk Activated Carbon Electrode in Acidic Media Supercapacitors (2022-01-01)
Application of Lean Manufacturing to Improve the Performance of Health Care Sector in Libya (2010-01-01)
Microstructural evolutions and enhanced mechanical performance of novel Al-Zn die-casting alloys processed by squeezing and hot extrusion (2021-01-01)
Microstructure and mechanical properties investigation on nanostructured Nickel 200 alloy using multi-axial forging (2018-01-01)
Strain uniformity footprint on mechanical performance and erosion-corrosion behavior of equal channel angular pressed pure titanium (2020-01-01)
Severe plastic deformation and its application on processing titanium: a review (2017-01-01)
Effect of TiB2/Gr Hybrid Reinforcements in Al 7075 Matrix on Sliding Wear Behavior Analyzed by Response Surface Methodology (2021-01-01)
Effect of using 4mat method on academic achievement and attitudes toward engineering economy for undergraduate students (2016-01-01)
Graphite-TiO2-doped coated sand granules for efficient continuous removal of methylene blue dye: Combining adsorption and photocatalytic degradation (2023-01-01)
Erosion-corrosion behavior of AA 6066 aluminum alloy (2014-01-01)
Effect of semisolid and heat treatment process on microstructural refinement of Al–7Si alloy (2023-01-01)
Effect of Equal Channel Angular Pressing (ECAP) on Erosion-Corrosion of Pure Copper (2017-01-01)
Optimization and Mapping of the Deep Drawing Force Considering Friction Combination (2021-01-01)
Surface Roughness Investigation and Stress Modeling by Finite Element on Orthogonal Cutting of Copper (2018-01-01)
TiO2 NPs-immobilized silica granules: New insight for nano catalyst fixation for hydrogen generation and sustained wastewater treatment (2023-01-01)
Synthesis of TiO2-incorporated activated carbon as an effective Ion electrosorption material (2023-01-01)
Combining heat treatment and high-pressure torsion to enhance the hardness and corrosion resistance of A356 alloy (2022-01-01)
Enhancing sustainability and power generation from sewage‐driven air‐cathode microbial fuel cells through innovative anti‐biofouling spacer and biomass‐derived anode (2025-01-01)
Experimental Study of the Corrosiveness of Ternary Blends of Biodiesel Fuel (2021-01-01)
Influence of grain refinement by ECAP on mechanical and erosion corrosion properties of AISI 4130 steel: experimental and prediction approach (2019-01-01)
Molybdenum carbide/Ni nanoparticles embedded into carbon nanofibers as an effective non-precious catalyst for green hydrogen production from methanol electrooxidation (2023-01-01)
Surface Modelling of Nanostructured Copper Subjected to Erosion-Corrosion (2017-01-01)
Manufacturing of (Al–10Zn)/TiB2 in-situ nanocomposites by reactive liquid metallurgy and hot-extrusion for enhanced interfacial bonding and mechanical properties (2022-01-01)
Surface properties and erosion–corrosion behavior of nanostructured pure titanium in simulated body fluid (2018-01-01)
Influence of section thickness on the thermal conductivity of compacted graphite cast iron at elevated temperatures (2014-01-01)
Benefits and limitations of N2 addition with Ar as shielding gas on microstructure change and their effect on hardness and corrosion resistance of duplex stainless … (2025-01-01)
Microstructure refinement by a combination of heat treatment and thixoforming process followed by severe plastic deformation and their effects on Al-Si alloy hardness (2022-01-01)
Effects of Self-Lubricant Coating and Motion on Reduction of Friction and Wear of Mild Steel and Data Analysis from Machine Learning Approach (2021-01-01)
Effect of nanoparticle reinforcement on mechanical properties and erosion–corrosion behavior of cast aluminum (2019-01-01)
Experimental Study and Prediction of Erosion-Corrosion of AA 6066 Aluminum Using Artificial Neural Network (2017-01-01)
The effect of magnesium to sulfur ratio on the graphite morphology of graphite cast iron produced at differrent section thicknesses (2012-01-01)
The Microstructural Refinement of the A356 Alloy Using Semi-Solid and Severe Plastic-Deformation Processing (2023-01-01)
Microstructural evolutions, hot deformation and work hardening behaviour of novel Al–Zn binary alloys processed by squeezing and hot extrusion (2022-01-01)
Strain behavior of nickel alloy 200 during multiaxial forging through finite element modeling (2019-01-01)
Erosion-Corrosion Behavior of Nano-Structured Pure Copper under Different Flowing Velocities (2015-01-01)
Development of sustainable inhibitors for corrosion control. Sustainability. 2022; 14 (15): 9502 (2026-01-01)
Data-Driven Design of Epoxy–Granite Machine Foundations: Bayesian Optimization for Enhanced Compressive Strength and Vibration Damping (2026-01-01)
Effect of SiC content and hot compaction on the microstructure, thermal, mechanical, and tribological characteristics of aluminum matrix nanocomposites produced via powder … (2025-01-01)
Influence Of Specimen Geometry And Lubrication Conditions On The Compressionbehavior Of AA6066 Aluminum Alloy (2015-01-01)
Cost‑effective sewage‑powered microbial fuel cells with nitrogen‑doped cobalt carbon nanofiber cathodes and biomass‑derived graphitized anodes (2025-01-01)
Erosion-Corrosion Resistance and Electrochemical Behavior of AZ31 Magnesium Alloy Processed by Equal Channel Angular Pressing (ECAP) (2021-01-01)
On the Compression Properties and Erosion-Corrosion Behaviour of Al 6061/15%Sicp Composite (2020-01-01)
Enhanced performance of CoNi nanoparticles-decorated activated carbon anode for direct urea fuel cells: from simulated solutions to real wastewater applications (2025-01-01)
NiMnO nanoparticle-activated carbon anodes for efficient urea oxidation and energy production in wastewater-driven direct urea fuel cells (2024-01-01)
Synthesizing and hot deformation behavior of novel Al-X wt.% Zn alloys for advanced casting industries (2020-01-01)
Erosion Corrosion Behavior of Nanostructure Commercial Pure Titanium in Simulated Body Fluid (2019-01-01)
Abu El-Ainin H (2013-01-01)
Metals (Basel, Switz.), 2017, vol. 7 (5) (2026-01-01)
Investigation of Microstructure, Hardness, and Electrochemical Properties: The Effects of N2 Addition on the Welding of Duplex Stainless Steel (DSS) (2026-01-01)
Post-Print Annealing of FDM-Printed Polylactic Acid: Mapping Strength, Crystallinity, and α′/α Polymorph Composition via a Replicated Taguchi L9 Design (2026-01-01)
People-Centered Lean Manufacturing: Drivers of Operational Performance in Saudi Arabian Industries (2026-01-01)
Integrating Lean Six Sigma with Sustainability Goals in Saudi Food Processing: A Case Study Using a Quantitative Framework for Measuring Sustainability Contributions and … (2026-01-01)
DEVELOPMENT OF AL-ZN DIE-CASTING ALLOYS AND ITS FELXURAL DEFORMATION BEHAVIOR (2020-01-01)
Lean Manufacturing Structural Model for Improving Operational Performance of Diverse Industries (2026-01-01)
Numerical and Experimental Investigation of Process Parameter Effects on Geometric Dimensions and Primary Dendrite Arm Spacing in Laser Cladding of Inconel 625 Superalloy (2026-01-01)
Multi-Objective Optimization of the Mechanical Properties of 3D-Printed PLA: An Integrated Taguchi and NSGA-II Approach (2026-01-01)
Interface-engineered nickel oxyhydroxide on carbon nanofibers for efficient urea oxidation and wastewater-to-energy conversion (2026-01-01)
A Predict–Optimize–Evaluate Framework for Sustainable Traffic Safety Resource Allocation: LSTM Forecasting with Triangulated Enforcement Elasticity in Saudi Arabia (2026-01-01)
A Cohesive-Zone-Modified Point-Stress Criterion for Notched Polymer Composites: Derivation, Calibration, and Validation (2026-01-01)
Enhancement of Mechanical Properties of Cu–Fe–Ni–Co Medium‐Entropy Alloys Reinforced With Tungsten Carbide and Graphene Nanosheets (2026-01-01)
The Microstructural Refinement of the A356 Alloy Using Semi-Solid and Severe Plastic-Deformation Processing. Metals 2023, 13, 1843 (2023-01-01)
Role of Lean Manufacturing in Enhancing Operational Performance of Aluminum Industry (2019-01-01)
Enhanced Mechanical and Erosion-Corrosion Properties of Al/Nano Al2O3 Composite by ECAP (2019-01-01)
Effect of TiB (2019-01-01)
Mechanical Properties of Nanostructured Nickel Alloy Processed Using Multiaxial Forging (2018-01-01)
Surface roughness investigation and stress modeling by finite element on orthogonal cutting of copper. Metals (Basel) 8 (2018-01-01)
INFLUENCE OF SPECIMEN GEOMETRY AND LUBRICATION CONDITIONS ON THE COMPRESSION BEHAVIOR OF AA 6066 ALUMINUM ALLOY (2015-01-01)
Experimental Study for Characterization of Mechanical Behavior of Al/SiCp Composites during Hot Working (2015-01-01)
Proposed Model for Optimization of Constrained Multipass Turning Opertaion (2009-01-01)
Prediction of the flow stress for 6061 al 15% SiCp composite during hot deformation (2009-01-01)
Neural network for predicting tool wear and current consumption in turning Al 10% Sicp. (2008-01-01)
Newly Proposed Membrane for Sewage Wastewater-Driven High Power Generation Stable Microbial Fuel Cells (2026-01-01)
Osama M. Irfan, Fahad A. Al-Mufadi & (2026-01-01)

المواد التدريسية