رمز بسيط، تكوّن من سلسلة روابط مُحاطة بدائرة، وهي رمز شائع للاتصال أو الارتباط التشعبي. تم تحديد خطوط الأيقونة بلون أسود داكن على الخلفية، مع إضافة عناصر عسكرية من الهوية الوطنية السعودية مثل الغترة والشماع والبشت السعودي، لتعكس الطابعة المحلية المميزة لجامعة القصيم.

روابط المواقع الالكترونية الرسمية التعليمية السعودية تنتهي بـ

edu.sa

جميع روابط المواقع الرسمية التعليمية التابعة للجهات الحكومية في المملكة العربية السعودية تنتهي بـ .edu.sa

علامة لفتة سوداء اللون من الجلد البسيط، قبضة بدائرة سوداء، يعلوها رسم واضحي لغترة سعودية مع شماع وعقال، تبرز معالم البشت السعودي في. يرمز هذا التصميم إلى مفهوم الأمان وخصوصية البيانات الرقمية يعكس هوية جامعة القصيم.
المواقع الالكترونية الحكومية تستخدم بروتوكول HTTPS للتشفير و الأمان.
المواقع الالكترونية الآمنة في المملكة العربية السعودية تستخدم بروتوكول HTTPS للتشفير.
هيئة الحكومة الرقمية
مسجل لدى هيئة الحكومة الرقمية برقم: 20260416249
شعار جامعة القصيم
فتح محرك البحث
بحث
بوابة الدخول الموحد MyQU
MyQU

أعضاء هيئة التدريس

المحتوى

يرتدي رجل يرتدي زيًا أبيض تقليديًا مع شماغ سعودي أحمر وأبيض داخل أحد المباني، مسجون في الكاميرا بتعبير حيادي كما لو كان يلتقط صورة لملف أعضاء هيئة التدريس في جامعة القصيم.
صورة عضو هيئة التدريس

محمد عاشور محمد الخيتوني

أستاذ
كلية العلوم،
قسم الكيمياء

البيانات الشخصية

  • Kh.Mohamed@qu.edu.sa
  • الساعات المكتبية
    Google Scholar
    OneDrive

    المؤهلات العلمية

    • أستاذ دكتور

    الاهتمامات البحثية

    • Mechanical alloying; Microstrucral analysis; magnetic properties; Alloys; Nanostructured materials

    الأبحاث المنشورة

    • Fabrication and OER/HER electrochemical activity of Sm, Al assisted g-C3N4 nanocomposite for alkaline water splitting (2025-01-16)
    • Controlled phase transformation and nanostructure development in Al-Ni<sub>7</sub>Zr<sub>3</sub> mixture powders via mechanical alloying (2025-11-28)
    • Mechanosynthesis of Nanocrystalline Biphasic Ni-Fe Alloy Powders by Mechanical Alloying and Their Structural and Thermal Characterization (2025-02-28)
    • X-Ray Diffraction and Mossbauer Studies of Nanostructured Ni<sub>40</sub>Fe<sub>60</sub> Powder: Structure Defects and Hyperfine Structure (2022-09-02)
    • Effects of thermal cycling on the thermal and magnetic response of Ni-Mn-Sn-Pd alloys (2023-10-19)
    • Effect of High-Energy Ball Milling on the Structural and Magnetic Behavior of Fe<sub>60</sub>Al<sub>40</sub> Alloy (2023-07-06)
    • Effect of Silicon Additions on Structural and Microstructural Properties of Nanostructured FeCoNi Alloy Prepared by High-Energy Ball Milling (2022-10-08)
    • Luminescence and protonic conduction of Eu3+doped BaCeO3 perovskite synthesized by glycine-nitrate combustion method (2023-05-18)
    • Structural, microstructural, and magnetic properties of nanocrystalline-amorphous Fe-Co-Ta-B alloy processed by high-energy mechanical alloying (2023-10-01)
    • Effect of phosphorus additions and milling time on the mechanosynthesis of Ni50Cu40-x(Fe2B)10Px alloys (2024-11-12)
    • Comparative optical thermometry analysis using Na<sub>2</sub>SrP<sub>2</sub>O<sub>7</sub>:Er<SUP>3+</SUP>/Yb<SUP>3+</SUP> phosphors: evaluation of LIR<sub>TCL</sub> and LIR<sub>NTCL</sub> methods for high-resolution temperature sensing (2024-12-10)
    • Characterization of the microstructural, magnetic, and thermal behaviors of boron-doped Fe-Co-Ni alloys produced via mechanical alloying (2024-07-21)
    • Study of the Microstructural, Thermal, and Magnetic Properties of High-Energy Ball-Milled Nanocrystalline Fe(Al) (2022-10-01)
    • Microstructure and Kinetics of Thermal Behavior of Martensitic Transformation in (Mn,Ni)Sn Heusler Alloy (2022-11-01)
    • Nanostructured Mn-Ni Powders Produced by High-Energy Ball-Milling for Water Decontamination from RB5 Dye (2023-06-01)
    • Synthesis, Structural and Magnetic Characterization of Superparamagnetic Ni<sub>0.3</sub>Zn<sub>0.7</sub>Cr<sub>2-x</sub>Fe<sub>x</sub>O<sub>4</sub> Oxides Obtained by Sol-Gel Method (2023-06-01)
    • Optical, Dielectric, and Electrical Properties of Tungsten-Based Materials with the Formula Li<sub>(2-x)</sub>Na<sub>x</sub>WO<sub>4</sub> (x=0, 0.5, and 1.5) (2023-12-01)
    • Magnetic, Dielectric, Electrical, Optical and Thermal Properties of Crystalline Materials (2024-03-01)
    • Microstructure and Magnetic Properties of Nanocrystalline Fe<sub>60-x</sub>Co<sub>25</sub>Ni<sub>15</sub>Si<sub>x</sub> Alloy Elaborated by High-Energy Mechanical Milling (2022-09-01)
    • Synthesis and Characterization of New Composite Materials Based on Magnesium Phosphate Cement for Fluoride Retention (2023-01-01)
    • Study of Modified Magnesium Phosphate Cement for Fluoride Removal (2023-09-01)
    • Study of Structural, Compression, and Soft Magnetic Properties of Fe<sub>65</sub>Ni<sub>28</sub>Mn<sub>7</sub> Alloy Prepared by Arc Melting, Mechanical Alloying, and Spark Plasma Sintering (2023-11-01)
    • Degradation of Azo Dye Solutions by a Nanocrystalline Fe-Based Alloy and the Adsorption of Their By-Products by Cork (2023-12-01)
    • Advancing in Cesium Retention: Application of Magnesium Phosphate Cement Composites (2024-05-01)
    • Removal of Reactive Black 5 Azo Dye from Aqueous Solutions by a Combination of Reduction and Natural Adsorbents Processes (2023-03-01)
    • Manufacturing of Novel Nanostructured TiCrC Carbides Using Mechanical Alloying and Spark Plasma Sintering (2023-06-01)
    • Mechano-Synthesis, Structure, and Thermal and Magnetic Behaviors of the New Compound Mn<sub>1.2</sub>Co<sub>0.05</sub>Fe<sub>0.7</sub>P<sub>0.45</sub>Si<sub>0.5</sub>B<sub>0.05</sub> (2024-03-01)
    • Nanomaterials as a Sustainable Choice for Treating Wastewater: A Review (2022-12-01)
    • Properties of High-Entropy Fe<sub>30</sub>Co<sub>20</sub>Ni<sub>20</sub>Mn<sub>20</sub>Al<sub>10</sub> Alloy Produced by High-Energy Ball Milling (2024-01-01)
    • Microstructural and Magnetic Characteristics of High-Entropy FeCoNiMnTi Alloy Produced via Mechanical Alloying (2024-11-01)
    • Designing Co-Fe nanocrystalline powders for powder metallurgy and soft magnetic applications: Phase evolution, defect structuring and magnetic performance engineering (2026-01-19)
    • Effects of processing conditions of a ball-milled Fe-Co-Nb-B alloy on the microstructural and thermal properties (2026-06-01)
    • Performance evaluation and fouling behavior of a submerged vacuum membrane distillation system for desalination (2026-02-04)
    • Ni-Mn-Sn-Cu Alloys after Thermal Cycling: Thermal and Magnetic Response (2021-11-01)
    • Structural and thermal properties of the Fe-based alloys prepared by mechanical milling (2022-02-03)
    • Microstructural and Magnetic Behavior of Nanocrystalline Fe-12Ni-16B-2Si Alloy Synthesis and Characterization (2021-11-01)
    • Effect of ECAP and Subsequent Annealing on Microstructure, Texture, and Microhardness of an AA6060 Aluminum Alloy (2021-11-15)
    • Characterization and thermal analysis of new amorphous Co<sub>60</sub>Fe<sub>18</sub>Ta<sub>8</sub>B<sub>14</sub> alloy produced by mechanical alloying (2021-03-08)
    • Microstructure, Magnetic and Mossbauer Studies of Mechanically Alloyed FeCoNi Nanocrystalline Powders (2021-01-03)
    • Effects of the Addition of Fe, Co on the Azo Dye Degradation Ability of Mn-Al Mechanically Alloyed Powders (2020-12-01)
    • Martensitic Transformation, Thermal Analysis and Magnetocaloric Properties of Ni-Mn-Sn-Pd Alloys (2020-12-01)
    • Martensitic Transformation and Crystalline Structure of Ni<sub>50</sub>Mn<sub>50-x</sub>Sn<sub>x</sub> Melt-Spun Heusler Alloys (2020-10-01)
    • High-Entropy FeCoNiB<sub>0.5</sub>Si<sub>0.5</sub> Alloy Synthesized by Mechanical Alloying and Spark Plasma Sintering (2020-10-01)
    • Strain-Hardening Behavior in an AA6060-T6 Alloy Processed by Equal Channel Angular Pressing (2020-09-21)
    • Microstructure and Mechanical Properties of AA6082-T6 by ECAP Under Warm Processing (2020-08-01)
    • The Effect of B and Si Additions on the Structural and Magnetic Behavior of Fe-Co-Ni Alloy Prepared by High-energy Mechanical Milling (2020-05-15)
    • Magnetic properties, martensitic and magnetostructural transformations of ferromagnetic Ni-Mn-Sn-Cu shape memory alloys (2020-04-03)
    • Thermal and structural analysis of Ni<sub>50</sub>Mn<sub>50-x</sub>In<sub>x</sub> shape memory alloys (2020-03-01)
    • Effects of partial Li-substitution on magnetic and magnetocaloric properties in New perovskite La<sub>1-x</sub>Li<sub>x</sub>SrMn<sub>2</sub>O<sub>5+δ</sub> nanoparticles (2020-02-15)
    • Solid solution evolution during mechanical alloying in Cu-Nb-Al compounds (2019-09-01)
    • NiMn-based Heusler magnetic shape memory alloys: a review (2019-08-01)
    • Martensitic transformation and magnetic behavior in Mn-rich Hensler MnNiIn shape memory alloys (2019-01-01)
    • DSC analysis of phase transformations during precipitation hardening in Al-Zn-Mg alloy (7020) (2019-06-01)
    • Structural, microstructural and thermal properties of nanostructured Fe<sub>60</sub>Al<sub>35</sub>Sn<sub>5</sub> alloy synthesized by mechanical alloying (2019-02-01)
    • Impact of annealing on martensitic transformation of Mn<sub>50</sub>Ni<sub>42.5</sub>Sn<sub>7.5</sub> shape memory alloy (2019-02-01)
    • Study of the microstructure and texture heterogeneities of Fe-48wt%Ni alloy severely deformed by equal channel angular pressing (2019-03-01)
    • Effect of heat treatment on microstructure, hardening and plasticity of a commercial Al-Zn-Mg-Cu alloy (2018-12-01)
    • Dealloying of Cu-Mg-Ca Alloys (2018-11-01)
    • Microstructure and strengthening mechanisms in an Al-Mg-Si alloy processed by equal channel angular pressing (ECAP) (2018-03-01)
    • High efficiency decolorization of azo dye Reactive Black 5 by Ca-Al particles (2017-12-01)
    • Improve the dielectric properties of PrSrNi<sub>0.8</sub>Mn<sub>0.2</sub>O<sub>4</sub> compounds by longer mechanical milling (2018-01-25)
    • The magnetic and structural properties of nanostructured (Fe<sub>75</sub>Al<sub>25</sub>)<sub>100-<i>x</i></sub>B<i><sub>x</sub></i> alloys prepared by mechanical alloying (2017-12-30)
    • Morphology and structure effect of B additive on the solid-state reaction between Ti and Al powders during mechanical alloying (2017-11-01)
    • Structure and microstructure evolution of Al-Mg-Si alloy processed by equal-channel angular pressing (2017-09-01)
    • Nanofibrillated cellulose as nanoreinforcement in Portland cement: Thermal, mechanical and microstructural properties (2017-07-01)
    • Crystal structure study of manganese and titanium substituted BaLaFe<sub>2</sub>O<sub>6-δ</sub> (2017-07-01)
    • Structural, magnetic and magnetocaloric properties of nanostructured Pr<sub>0.5</sub>Sr<sub>0.5</sub>MnO<sub>3</sub> manganite synthesized by mechanical alloying (2017-08-01)
    • Effect of Amorphization Degree on Mechanical and Microstructural Properties of Portland Cement Paste (2017-06-01)
    • Structural and martensitic transformation of MnNiSn shape memory alloys (2017-04-01)
    • Rapid degradation of azo-dye using Mn-Al powders produced by ball-milling (2017-01-01)
    • Alternative current conduction, dielectric behavior, transport properties and Mossbauer study of LaBaFe<sub>0.5</sub>Ti<sub>0.5</sub>MnO<sub>6-δ</sub> new compound (2017-02-25)
    • Investigation of the enthalpy/entropy variation and structure of Ni-Mn-Sn (Co, In) melt-spun alloys (2016-12-01)
    • A study of densification and phase transformations of nanocomposite Cu-Fe prepared by mechanical alloying and consolidation process (2016-10-01)
    • Morphology and structure effect of Ti additive on the solid-state reaction between Ni and Al powders during mechanical alloying (2016-10-01)
    • Dielectric relaxation and polaronic hopping in Mn-substituted LaSrNiO<sub>4</sub> nickelates prepared by mechanical milling method (2016-12-15)
    • Effect of boron addition on structural and magnetic properties of nanostructured Fe<sub>75</sub>Al<sub>25</sub> alloy prepared by high energy ball milling (2016-10-15)
    • Mossbauer and X-ray studies of mechanically alloyed Fe<sub>60</sub>Ni<sub>30</sub>Cr<sub>10</sub> prepared by high energy ball milling (2016-07-01)
    • Synthesis and Characterization of Nanocrystalline Al-20 at. % Cu Powders Produced by Mechanical Alloying (2016-07-01)
    • Structural and thermal characterizations of the solid-state reaction between Ni, Al, and Ti powders during mechanical alloying (2016-08-01)
    • Morphology, structural and thermal characterization of nanocrystalline Ni<sub>50</sub>Cu<sub>30</sub>(Fe<sub>2</sub>B)<sub>10</sub>P<sub>10</sub> powders prepared by mechanical alloying (2016-05-18)
    • Magnetic and microstructural properties of nanocrystalline Fe-25 at% Al and Fe-25 at% Al+0.2 at%B alloys prepared by mechanical alloying process (2016-04-26)
    • Structural, microstructural and dielectric studies in multiferroic LaSrNiO<sub>4-δ</sub> prepared by mechanical milling method (2016-03-25)
    • Electrical conductivity and dielectric study of LaBaFe<sub>0.5</sub>Zn<sub>0.5</sub>MnO<sub>6-δ</sub> compound (2016-02-01)
    • Microstructural evolution and corrosion behavior of nanocrystalline FeAl synthesized by mechanical alloying (2016-02-05)
    • Enhancement of the dielectric response through Al-substitution in La<sub>1.6</sub>Sr<sub>0.4</sub>NiO<sub>4</sub> nickelates (2016-01-01)
    • Phase transformations and microstructural properties of nanocrystalline Fe<sub>75</sub>Si<sub>10</sub>B<sub>10</sub>Nb<sub>5</sub> alloy synthesized by mechanical alloying (2015-11-01)
    • Inhibitive action of stored olive mill wastewater (OMW) on the corrosion of copper in a NaCl solution (2015-01-01)
    • Influence of chemical composition on martensitic transformation of MnNiIn shape memory alloys (2015-10-01)
    • Effects of Co Additions on the Martensitic Transformation and Magnetic Properties of Ni-Mn-Sn Shape Memory Alloys (2015-10-01)
    • Structural characterization and Mossbauer studies of nanocrystalline Fe<sub>60</sub>Ni<sub>20</sub>Cr<sub>10</sub>B<sub>10</sub> alloy prepared by high energy ball milling (2015-11-01)
    • Structure and Mossbauer Analysis of Melt-Spun Fe-Pd Ribbons Containing Ni and Co (2015-06-01)
    • Structural and Magnetic Changes due to the Martensitic Transformation in Rapidly Solidified Ni<sub>50</sub>Mn<sub>37</sub>Sn<sub>6.5</sub>In<sub>6.5</sub> Ribbons (2015-07-01)
    • Structural and Thermal Study of Nanocrystalline Fe-Al-B Alloy Prepared by Mechanical Alloying (2015-08-01)
    • Stacking faults and structural characterization of mechanically alloyed Ni<sub>50</sub>Cu<sub>10</sub>(Fe<sub>2</sub>B)<sub>10</sub>P<sub>30</sub> powders (2015-04-16)
    • Thermal and Structural Analysis of Mn<sub>49.3</sub>Ni<sub>43.7</sub>Sn<sub>7.0</sub> Heusler Alloy Ribbons (2015-02-01)
    • Microstructure evolution and thermal stability of nanostructured Fe<sub>50</sub>Al<sub>30</sub>(Ni<sub>70</sub>Zr<sub>30</sub>)<sub>10</sub>B<sub>10</sub> powders produced by mechanical alloying (2014-10-01)
    • Structural and microstructural properties of nanocrystalline Cu-Fe-Ni powders produced by mechanical alloying (2014-11-01)
    • Structural characterization of mechanically alloyed nanocrystalline Cu-Fe: Strain broadening due to dislocations (2012-01-01)
    • Phase transformations during mechanical alloying of Fe-30% Al-20% Cu (2013-09-01)
    • Amorphization of Al<sub>50</sub>(Fe<sub>2</sub>B)<sub>30</sub>Nb<sub>20</sub> Mixture by Mechanical Alloying (2013-10-01)
    • Synthesis and structural characterization of nanocrystalline FeAlNbB alloy prepared by mechanical alloying (2013-09-15)
    • Influence of heat treatments on the structure of FeAl powders mixture obtained by mechanical alloying (2013-01-01)
    • Nanocrystalline (Fe<sub>60</sub>Al<sub>40</sub>)<sub>80</sub>Cu<sub>20</sub> alloy prepared by mechanical alloying (2013-03-25)
    • Mechanochemical reactions in nanocrystalline Cu-Fe system induced by mechanical alloying in air atmosphere (2012-07-01)
    • LDPE PHASE COMPOSITION IN LDPE/Cu COMPOSITES USING THERMAL ANALYSIS AND FTIR SPECTROSCOPY (2011-05-01)
    • Microstructure evolution and mechanical properties of nanocrystalline FeAl obtained by mechanical alloying and cold consolidation (2011-02-17)
    • X-ray studies of structure defects in nanostructured FeAl alloy (2010-08-31)
    • Characterization of the mechanical properties changes in an Al-Zn-Mg alloy after a two-step ageing treatment at 70° and 135 °C (2010-06-01)
    • Characterization of Mechanically Alloyed Nanocrystalline Fe(Al): Crystallite Size and Dislocation Density (2010-01-01)
    • Recovery of the mechanical properties on the Al-4wt%Cu alloy (2010-01-01)
    • Recovery, grain growth and recrystallization of mechanically alloyed FeAl alloy (2010-01-01)
    • Characterization of nanocrystalline Al-based alloy produced by mechanical milling followed by cold-pressing consolidation (2009-06-01)
    • Structural evolution in nanocrystalline Cu obtained by high-energy mechanical milling: Phases formation of copper oxides (2009-05-05)
    • Study of the nanocrystalline bulk Al alloys synthesized by high energy mechanical milling followed by room temperature high pressing consolidation (2009-01-01)
    • Effect of heat treatment on plasticity of Al-Zn-Mg alloy: Microstructure evolution and mechanical properties (2009-01-01)
    • Effect of high energy mechanical milling on the properties of CuA1 copper (2009-01-01)
    • Characterization of Al and Fe nanosized powders synthesized by high energy mechanical milling (2008-07-01)
    • Microstructural and mechanical properties of copper processed by equal channel angular extrusion (2008-01-01)
    • The studies of crystallite size and microstrains in aluminum powder prepared by mechanical milling (2006-01-01)
    • X-ray studies of structure defects in nanostructured Al-4wt%Cu alloy (2006-01-01)
    • Microstructure evolution after thermal treatments of nanocrystalline Ni<sub>3</sub>Al and Ni<sub>3</sub>Al+B produced by filling (2004-01-01)
    • The effect of boron on the reordering of Ni<sub>3</sub>Al powders produced by filing (2004-01-01)
    • The effects of boron additions on the disordering and crystallite refinement of Ni<sub>3</sub>Al powders during mechanical milling (2003-09-01)
    • g-C3N4@Mn-TiO2 nano sorbent for efficient decontamination of lead from water systems (2025-07-15)
    • Effect of sequential tempering on the microstructural and mechanical properties of the 7075-alloy after a two-step aging treatment at 105 °C and 140 °C (2026-07-09)
    • Nanofibrillated cellulose as nanoreinforcement in Portland cement: Thermal, mechanical and microstructural properties (2017-01-01)
    • NiMn-based Heusler magnetic shape memory alloys: A review (2019-01-01)
    • Characterization of the mechanical properties changes in an Al–Zn–Mg alloy after a two-step ageing treatment at 70 and 135 C (2010-01-01)
    • Characterization of mechanically alloyed nanocrystalline Fe (Al): crystallite size and dislocation density (2010-01-01)
    • Microstructure and strengthening mechanisms in an Al-Mg-Si alloy processed by equal channel angular pressing (ECAP) (2018-01-01)
    • Structural, magnetic and magnetocaloric properties of nanostructured Pr0. 5Sr0. 5MnO3 manganite synthesized by mechanical alloying (2017-01-01)
    • Characterization of Al and Fe nanosized powders synthesized by high energy mechanical milling (2008-01-01)
    • Microstructure and mechanical properties of AA6082-T6 by ECAP under warm processing (2020-01-01)
    • Rapid degradation of azo-dye using Mn–Al powders produced by ball-milling (2017-01-01)
    • Characterization of nanocrystalline Al-based alloy produced by mechanical milling followed by cold-pressing consolidation (2009-01-01)
    • Nanomaterials as a Sustainable Choice for Treating Wastewater: A Review (2022-01-01)
    • DSC analysis of phase transformations during precipitation hardening in Al–Zn–Mg alloy (7020) M. Chemingui et al. (2019-01-01)
    • Mechanochemical reactions in nanocrystalline Cu–Fe system induced by mechanical alloying in air atmosphere (2012-01-01)
    • Microstructure evolution and mechanical properties of nanocrystalline FeAl obtained by mechanical alloying and cold consolidation (2011-01-01)
    • Phase transformations during mechanical alloying of Fe–30% Al–20% Cu (2013-01-01)
    • The effect of prolonged mechanical activation duration on the reactivity of Portland cement: Effect of particle size and crystallinity changes (2017-01-01)
    • X-ray studies of structure defects in nanostructured FeAl alloy (2010-01-01)
    • Enhancement of the dielectric response through Al-substitution in La1.6Sr0.4NiO4 nickelates (2016-01-01)
    • Comparative optical thermometry analysis using Na2SrP2O7:Er3+/Yb3+ phosphors: evaluation of LIRTCL and LIRNTCL methods for high-resolution … (2024-01-01)
    • Nanocrystalline (Fe60Al40) 80Cu20 alloy prepared by mechanical alloying (2013-01-01)
    • The studies of crystallite size and microstrains in aluminum powder prepared by mechanical milling (2006-01-01)
    • The magnetic and structural properties of nanostructured (Fe75Al25) 100-xBx alloys prepared by mechanical alloying (2017-01-01)
    • Structural, microstructural and dielectric studies in multiferroic LaSrNiO4-δ prepared by mechanical milling method (2016-01-01)
    • High-Entropy FeCoNiB0.5Si0.5 Alloy Synthesized by Mechanical Alloying and Spark Plasma Sintering (2020-01-01)
    • Synthesis and characterization of nanocrystalline Al-20 at.% Cu powders produced by mechanical alloying (2016-01-01)
    • Structural and microstructural properties of nanocrystalline Cu–Fe–Ni powders produced by mechanical alloying (2014-01-01)
    • Magnetic properties, martensitic and magnetostructural transformations of ferromagnetic Ni–Mn–Sn–Cu shape memory alloys (2020-01-01)
    • Structure and microstructure evolution of Al–Mg–Si alloy processed by equal-channel angular pressing (2017-01-01)
    • Thermal and Structural Analysis of Mn49.3Ni43.7Sn7.0 Heusler Alloy Ribbons (2015-01-01)
    • Crystallite refinement of NiAl powders during mechanical milling (2003-01-01)
    • Amorphization of Al50(Fe2B)30Nb20 Mixture by Mechanical Alloying (2013-01-01)
    • Fabrication and OER/HER electrochemical activity of Sm, Al assisted g-C3N4 nanocomposite for alkaline water splitting (2025-01-01)
    • Electrical conductivity and dielectric study of LaBaFe0. 5Zn0. 5MnO6− δ compound (2016-01-01)
    • Effects of Co additions on the martensitic transformation and magnetic properties of Ni–Mn–Sn shape memory alloys (2015-01-01)
    • Effect of ECAP and subsequent annealing on microstructure, texture, and microhardness of an AA6060 aluminum alloy (2022-01-01)
    • Structural, microstructural and thermal properties of nanostructured Fe60Al35Sn5 alloy synthesized by mechanical alloying (2019-01-01)
    • Microstructural evolution and corrosion behavior of nanocrystalline FeAl synthesized by mechanical alloying (2016-01-01)
    • Removal of reactive black 5 azo Dye from aqueous solutions by a combination of reduction and natural adsorbents processes (2023-01-01)
    • Microstructure, magnetic and Mössbauer studies of mechanically alloyed FeCoNi nanocrystalline powders (2021-01-01)
    • High efficiency decolorization of azo dye Reactive Black 5 by Ca-Al particles (2017-01-01)
    • Characterization and thermal analysis of new amorphous Co60Fe18Ta8B14 alloy produced by mechanical alloying (2021-01-01)
    • Strain‐Hardening Behavior in an AA6060‐T6 Alloy Processed by Equal Channel Angular Pressing (2021-01-01)
    • Influence of chemical composition on martensitic transformation of MnNiIn shape memory alloys (2015-01-01)
    • Structural evolution in nanocrystalline Cu obtained by high-energy mechanical milling: Phases formation of copper oxides (2009-01-01)
    • The effect of boron on the reordering of Ni3Al powders produced by filing (2004-01-01)
    • Luminescence and protonic conduction of Eu3+ doped BaCeO3 perovskite synthesized by glycine-nitrate combustion method (2023-01-01)
    • Influence of heat treatments on the structure of FeAl powders mixture obtained by mechanical alloying (2013-01-01)
    • Martensitic transformation, thermal analysis and magnetocaloric properties of Ni-Mn-Sn-Pd alloys (2020-01-01)
    • Microstructure and Magnetic Properties of Nanocrystalline Fe60−xCo25Ni15Six Alloy Elaborated by High-Energy Mechanical Milling (2022-01-01)
    • A study of densification and phase transformations of nanocomposite Cu-Fe prepared by mechanical alloying and consolidation process (2016-01-01)
    • Properties of High-Entropy Fe30Co20Ni20Mn20Al10 Alloy Produced by High-Energy Ball Milling (2023-01-01)
    • Structural, microstructural, and magnetic properties of nanocrystalline-amorphous Fe–Co–Ta–B alloy processed by high-energy mechanical alloying (2023-01-01)
    • The effect of B and Si additions on the structural and magnetic behavior of Fe-Co-Ni alloy prepared by high-energy mechanical milling (2020-01-01)
    • Solid solution evolution during mechanical alloying in Cu-Nb-Al compounds (2019-01-01)
    • Inhibitive action of stored olive mill wastewater (OMW) on the corrosion of copper in a NaCl solution (2015-01-01)
    • Structural and thermal study of nanocrystalline Fe-Al-B alloy prepared by mechanical alloying (2015-01-01)
    • LDPE phase composition in LDPE/Cu composites using thermal analysis and FTIR spectroscopy (2011-01-01)
    • Effect of High-Energy Ball Milling on the Structural and Magnetic Behavior of Fe60Al40 Alloy (2024-01-01)
    • Dealloying of Cu-mg-ca alloys (2018-01-01)
    • Optical, Dielectric, and Electrical Properties of Tungsten-Based Materials with the Formula Li(2−x)NaxWO4 (x = 0, 0.5, and 1.5) (2023-01-01)
    • Synthesis and characterization of new composite materials based on magnesium phosphate cement for fluoride retention (2023-01-01)
    • Investigation of the enthalpy/entropy variation and structure of Ni–Mn–Sn (Co, In) melt-spun alloys (2016-01-01)
    • Effect of boron addition on structural and magnetic properties of nanostructured Fe75Al25 alloy prepared by high energy ball milling (2016-01-01)
    • Phase transformations and microstructural properties of nanocrystalline Fe75Si10B10Nb5 alloy synthesized by mechanical alloying (2015-01-01)
    • Microstructural and magnetic behavior of nanocrystalline Fe-12Ni-16B-2Si alloy synthesis and characterization (2021-01-01)
    • Effects of the addition of Fe, Co on the azo dye degradation ability of Mn-Al mechanically alloyed powders (2020-01-01)
    • Effect of silicon additions on structural and microstructural properties of nanostructured FeCoNi alloy prepared by high-energy ball milling (2023-01-01)
    • Structural and martensitic transformation of MnNiSn shape memory alloys (2017-01-01)
    • Morphology and structure effect of Ti additive on the solid-state reaction between Ni and Al powders during mechanical alloying (2016-01-01)
    • Structural characterization and Mössbauer studies of nanocrystalline Fe60Ni20Cr10B10 alloy prepared by high energy ball milling (2015-01-01)
    • Characterization of the microstructural, magnetic, and thermal behaviors of boron-doped Fe–Co–Ni alloys produced via mechanical alloying (2024-01-01)
    • Ni-Mn-Sn-Cu alloys after thermal cycling: Thermal and magnetic response (2021-01-01)
    • Study of the microstructure and texture heterogeneities of Fe–48wt% Ni alloy severely deformed by equal channel angular pressing (2019-01-01)
    • Dielectric relaxation and polaronic hopping in Mn-substituted LaSrNiO4 nickelates prepared by mechanical milling method (2016-01-01)
    • Study of the nanocrystalline bulk Al alloys synthesized by high energy mechanical milling followed by room temperature high pressing consolidation (2009-01-01)
    • Microstructure evolution after thermal treatments of nanocrystalline Ni3Al and Ni3Al+B produced by filling (2004-01-01)
    • Study of Structural, Compression, and Soft Magnetic Properties of Fe65Ni28Mn7 Alloy Prepared by Arc Melting, Mechanical Alloying, and Spark Plasma Sintering (2023-01-01)
    • Manufacturing of Novel Nanostructured TiCrC Carbides Using Mechanical Alloying and Spark Plasma Sintering (2023-01-01)
    • Nanostructured Mn–Ni powders produced by high-energy ball-milling for water decontamination from RB5 dye (2023-01-01)
    • Impact of annealing on martensitic transformation of Mn50Ni42.5Sn7.5 shape memory alloy (2019-01-01)
    • Effect of high energy mechanical milling on the properties of CuA1 copper (2009-01-01)
    • Microstructural and magnetic characteristics of high-entropy FeCoNiMnTi alloy produced via mechanical alloying (2024-01-01)
    • Study of modified magnesium phosphate cement for fluoride removal (2023-01-01)
    • X-Ray Diffraction and Mössbauer Studies of Nanostructured Ni40Fe60 Powder: Structure Defects and Hyperfine Structure (2022-01-01)
    • Structural and thermal properties of the Fe-based alloys prepared by mechanical milling (2022-01-01)
    • Effect of heat treatment on microstructure, hardening and plasticity of a commercial Al-Zn-Mg-Cu alloy (2018-01-01)
    • Mössbauer and X-ray studies of mechanically alloyed Fe60Ni30Cr10 prepared by high energy ball milling (2016-01-01)
    • Recovery of the mechanical properties on the Al-4wt% Cu alloy (2010-01-01)
    • Degradation of azo dye solutions by a nanocrystalline Fe-based alloy and the adsorption of their by-products by cork (2023-01-01)
    • Study of the microstructural, thermal, and magnetic properties of high-energy ball-milled nanocrystalline fe (al) (2022-01-01)
    • Thermal and structural analysis of Ni50Mn50−xInx shape memory alloys: R. Ameur et al. (2020-01-01)
    • Effects of partial Li-substitution on magnetic and magnetocaloric properties in New perovskite La1-xLixSrMn2O5+ δ nanoparticles (2020-01-01)
    • Effect of amorphization degree on mechanical and microstructural properties of portland cement paste (2017-01-01)
    • Magnetic and microstructural properties of nanocrystalline Fe-25 at% Al and Fe-25 at% Al+ 0.2 at% B alloys prepared by mechanical alloying process (2016-01-01)
    • Synthesis and structural characterization of nanocrystalline FeAlNbB alloy prepared by mechanical alloying (2013-01-01)
    • Recovery, grain growth and recrystallization of mechanically alloyed FeAl alloy (2010-01-01)
    • Effects of thermal cycling on the thermal and magnetic response of Ni–Mn–Sn–Pd alloys (2024-01-01)
    • Synthesis, Structural and Magnetic Characterization of Superparamagnetic Ni0.3Zn0.7Cr2−xFexO4 Oxides Obtained by Sol-Gel Method (2023-01-01)
    • Microstructure and kinetics of thermal behavior of martensitic transformation in (Mn, Ni) Sn Heusler alloy (2022-01-01)
    • Alternative current conduction, dielectric behavior, transport properties and Mössbauer study of LaBaFe0. 5Ti0. 5MnO6-δ new compound (2017-01-01)
    • Structural and thermal characterizations of the solid-state reaction between Ni, Al, and Ti powders during mechanical alloying (2016-01-01)
    • Structure and Mössbauer analysis of melt-spun Fe-Pd ribbons containing Ni and Co (2015-01-01)
    • Stacking faults and structural characterization of mechanically alloyed Ni50Cu10(Fe2B)10P30 powders (2015-01-01)
    • Microstructure evolution and thermal stability of nanostructured Fe50Al30 (Ni70Zr30) 10B10 powders produced by mechanical alloying (2014-01-01)
    • Crystal structure, thermal behavior, electric and dielectric properties of a novel organic–inorganic hybrid compound based on iron (III) chloride (2025-01-01)
    • Martensitic Transformation and Crystalline Structure of Ni50Mn50−xSnx Melt-Spun Heusler Alloys (2020-01-01)
    • Improve the dielectric properties of PrSrNi0. 8Mn0. 2O4 compounds by longer mechanical milling (2018-01-01)
    • X‐ray studies of structure defects in nanostructured Al‐4wt% Cu alloy (2006-01-01)
    • g-C3N4@ Mn-TiO2 nano sorbent for efficient decontamination of lead from water systems (2025-01-01)
    • Synthesis and study of doped SrCeO3 perovskites as a candidate for the electrolyte of Solid Oxide Fuel Cells (SOFC) (2025-01-01)
    • Properties of High-Entropy Fe [sub. 30] Co [sub. 20] Ni [sub. 20] Mn [sub. 20] Al [sub. 10] Alloy Produced by High-Energy Ball Milling. (2023-01-01)
    • Spark Plasma Sintering of Nanostructured TiCrC Carbides Prepared via Mechanical Alloying (2022-01-01)
    • Synthesis and structural characterization of nanocrystalline Fe-Ni-Zr-B alloy prepared by powder metallurgy (2015-01-01)
    • Structural characterization of mechanically alloyed nanocrystalline Cu-Fe: Strain broadening due to dislocations (2012-01-01)
    • X-ray investigation of mechanical milling of Ni3Al (0.2 wt% B) powder: disordering, crystallite refinement and microstrains (2003-01-01)
    • A comparative analysis of the stored energy in shear-oriented grains and mechanical properties in two Al-Mg-Si alloys processed by equal-channel angular processing (2025-01-01)
    • Magnetic, Dielectric, Electrical, Optical and Thermal Properties of Crystalline Materials (2024-01-01)
    • Mechano-Synthesis, Structure, and Thermal and Magnetic Behaviors of the New Compound Mn1.2Co0.05Fe0.7P0.45Si0.5B0.05 (2024-01-01)
    • Synthesis of polyethylenimine-modified magnetic hydrogel nanocomposite absorbents for heavy metals removal (2022-01-01)
    • Thermal Stability of an Al-Mg-Si alloy after Equal Channel Angular Pressing (2020-01-01)
    • Structural and Martensitic Transformation of Heusler Mn-Ni-Sn Alloys (2019-01-01)
    • Morphology and structure effect of B additive on the solid-state reaction between Ti and Al powders during mechanical alloying (2017-01-01)
    • Performance evaluation and fouling behavior of a submerged vacuum membrane distillation system for desalination (2026-01-01)
    • Multifactorial Assessement of the Antimicrobial, Hematobiochemical, and Anti-Hypercholesterolemic Properties of Oudneya africana Extracts in Rats (2026-01-01)
    • Mechanosynthesis of Nanocrystalline Biphasic Ni-Fe Alloy Powders by Mechanical Alloying and Their Structural and Thermal Characterization (2025-01-01)
    • Ni-Mn-Sn-Cu alloys after thermal cycling: thermal and magnetic response. Materials. 2021; 14: 6851 (2021-01-01)
    • Martensitic transformation and magnetic behavior in Mn-rich Heusler MnNiIn shape memory alloys (2019-01-01)
    • Crystal structure study of manganese and titanium substituted BaLaFe2O6-δ (2017-01-01)
    • Structural and Magnetic Changes due to the Martensitic Transformation in Rapidly Solidified Ni50Mn37Sn6.5In6.5 Ribbons (2015-01-01)
    • LDPE PHASE COMPOSITION IN LDPE/Cu COMPOSITES USING THERMAL ANALYSIS AND FT-IR SPECTROSCOPY (2011-01-01)
    • Microstructural Evolution and Phase Formation in Nanocrystalline Ti0.8V0.2C Powder During High-Energy Mechanical Alloying (2026-01-01)
    • Effect of sequential tempering on the microstructural and mechanical properties of the 7075-alloy after a two-step aging treatment at 105° C and 140° C (2026-01-01)
    • Microstructural Evolution and Hardness Behavior of Hot-Consolidated Al95(AlSi)5 Matrix Composite Reinforced with Mechanically Alloyed Al–Cu–Nb and Al–Co … (2026-01-01)
    • Effects of processing conditions of a ball-milled Fe-Co-Nb-B alloy on the microstructural and thermal properties (2026-01-01)
    • From surface engineering to targeted nanomedicine: the evolving role of gold nanoparticle (2026-01-01)
    • Mechanosynthesis and Characterization of Nanostructured Mn-Al-B Permanent Magnets (2026-01-01)
    • Designing CoFe nanocrystalline powders for powder metallurgy and soft magnetic applications: Phase evolution, defect structuring and magnetic performance engineering (2026-01-01)
    • Controlled phase transformation and nanostructure development in Al–Ni7Zr3 mixture powders via mechanical alloying (2025-01-01)
    • Effect of phosphorus additions and milling time on the mechanosynthesis of Ni50Cu40-x (Fe2B) 10Px alloys (2025-01-01)
    • Comparative optical thermometry analysis using Na2SrP2O7:Er/Yb phosphors: evaluation of LIRTCL and LIRNTCL methods for high-resolution temperature sensing (2024-01-01)
    • Advancing in Cesium Retention: Application of Magnesium Phosphate Cement Composites (2024-01-01)
    • Precise Synthesis of Tetrablock Copolymers of Different Acrylamide Derivatives via Iterative Aqueous Cu(0)-Mediated Polymerization (2024-01-01)
    • Microstructure and Magnetic Properties of Nanocrystalline Fe [sub. 60− x] Co [sub. 25] Ni [sub. 15] Si [sub. x] Alloy Elaborated by High-Energy Mechanical Milling. (2022-01-01)
    • Microstructure and mechanical properties of Fe-48 (wt.%) Ni alloy processed by equal channel angular pressing (2020-01-01)
    • Synthèse, caractérisation et application des alliages à base de Mn-XY (X= Al; Y= Fe, Co) et Ca-Al dans la dégradation d'un colorant azoïque" Black 5" utilisé dans l'industrie … (2018-01-01)
    • Magnetic properties and magnetostructural transformations in Cu and Pd doped ferromagnetic Ni-Mn-Sn shape memory alloys (2018-01-01)
    • Morphology, structural and thermal characterization of nanocrystalline Ni50Cu30(Fe2B)10P10 powders prepared by mechanical alloying (2016-01-01)
    • Phase transformations and microstructural properties of nanocrystalline (2015-01-01)
    • Thermal and Structural Analysis of Mn49. 3Ni43. 7Sn7. 0 Heusler Alloy Ribbons (2015-01-01)
    • Degradation of azo dyes by rapidly solidified metallic particles (2015-01-01)
    • Crystal structure of oxonium o-toluidinium sulfate at 100K,(C7H10N)(H3O) SO4 (2014-01-01)
    • Amorphization of Al (FeB) Nb Mixture by Mechanical Alloying. (2013-01-01)
    • Nanocrystalline (Fe {sub 60} Al {sub 40}){sub 80} Cu {sub 20} alloy prepared by mechanical alloying (2013-01-01)
    • Microstructure evolution of the nanostructued Al-Cu alloy produced by equal-channel angular pressing (2005-01-01)
    • EVOLUTION DE LA MICROSTRUCTURE DE DEUX ALLIAGES Ni-Al-Ti A FORTE FRACTION VOLUMIQUE DE γ’(Ni3Al) AU COURS DES TRAITEMENTS THERMIQUES (2002-01-01)
    • Strain hardening behavior in an AA6060-T6 alloy processed by ECAP (2026-01-01)
    • d Article (2026-01-01)
    • Microstructure and mechanical properties of commercially Al-Mg-Si alloy processed by equal channel pressing (ECAP) (2026-01-01)
    • Troisième journées scientifiques des jeunes chercheurs en Génie Electrique et Informatique. (2026-01-01)
    • SD. 1-P037 Poster INFLUENCE OF Nb MICROADDITION ON MICROSTRUCTURE AND TEXTURE EVOLUTION IN A Fe-21Mn-1.3 Al-1.5 Si-0.5 C TWIP STEEL UNDER UNIAXIAL HOT-TENSILE CONDITIONS (2026-01-01)
    • Microstructural Evolution and Phase Formation in Nanocrystalline Ti<sub>0.8</sub>V<sub>0.2</sub>C Powder During High-Energy Mechanical Alloying (2026-07-14)

    المواد التدريسية

    • chem 101
    • chem 420

    اقتراحات

    بوابة الدخول الموحد
    إنجاز
    التعلم الإلكتروني
    البريد الإلكتروني
    دليل الخدمات
    خدمات الاستعلام

    ملفات تعريف الارتباط

    هذا الموقع يستخدم ملفات تعريف الارتباط الخاصة لضمان سهولة الاستخدام، وتحسين تجربتك أثناء التصفح، كما يوضح الأحكام والسياسات المتعلقة بخصوصية المستخدم. من خلال الاستمرار في تصفح هذا الموقع، فإنك تقر بقبول استخدام ملفات تعريف الارتباط، وما جاء في سياسة الخصوصية

    قبول