هاني رزق عبداللطيف عمار - جامعة القصيم

موقع حكومي رسمي تابع لحكومة المملكة العربية السعودية كيف تتحقق

روابط المواقع الالكترونية الرسمية التعليمية السعودية تنتهي بـ edu.sa

جميع روابط المواقع الرسمية التعليمية التابعة للجهات الحكومية في المملكة العربية السعودية تنتهي بـ .edu.sa

المواقع الالكترونية الحكومية تستخدم بروتوكول HTTPS للتشفير و الأمان.

المواقع الالكترونية الآمنة في المملكة العربية السعودية تستخدم بروتوكول HTTPS للتشفير.

مسجل لدى هيئة الحكومة الرقمية برقم: 20250413538

أعضاء هيئة التدريس

هاني رزق عبداللطيف عمار

أستاذ

كلية الهندسة،

قسم هندسة ميكانيكية

البيانات الشخصية

المؤهلات العلمية

الاهتمامات البحثية

الأبحاث المنشورة

Osteogenic potential of nanostructured Cu/W/Co in Fe-Mn alloys designed for maxillofacial applications: in vivo study in dog model (2025-06-25)
Effect of Alloy Composition, Solidification Rate, Porosity Level, Grain Refining and Modification on the Performance of Aluminum-Based Alloys (2025-08-18)
Effect of Be, Sr, Mn, Mg, Cr and Si Addition on Neutralization and Fragmentation of β-Al<sub>5</sub>SiFe Phase in Al-(6-10) %Si Alloys (2025-02-11)
Effect of La and Ce addition on the microstructural characteristics and tensile properties of 220 and 356.1 alloys (2025-05-31)
Development of Sr modified Al-Si-Mg-Fe based alloys for automotive components (2025-01-07)
Microstructure, mechanical properties, and corrosion behavior of Zn-x wt. % Ti (x=0, 0.3 and 1) alloys for biomedical applications (2025-04-22)
Microstructural evolution and enhanced mechanical performance of dissimilar CoCrFeMnNi high entropy alloy-duplex stainless steel welds using laser beam welding (2025-04-22)
Determination of Young's modulus in aluminum alloys: Role of precipitates, dispersoids, and intermetallics (2025-07-09)
Microstructural evolution and enhanced mechanical performance of dissimilar CoCrFeMnNi high entropy alloy-duplex stainless steel welds using laser beam welding (vol 36, pg 4985, 2025) (2025-11-14)
Microstructure, mechanical properties, and corrosion behavior of Zn-x wt. % Ti (x = 0, 0.3 and 1) alloys for biomedical applications (vol 36, pg 4968, 2025) (2025-11-14)
Influence of date-palm-fibers (DPFs) content and nanocrystallite FeCrCuMnTi high-entropy alloy fillers in polypropylene matrix on mechanical and structural performance of thermoplastic composite materials (2025-08-25)
Synthesis, microstructural evolution, and compaction behavior of Mg<sub>30</sub>-Al<sub>25</sub>-Ti<sub>25</sub>-Li<sub>15</sub>-Si<sub>5</sub> lightweight high-entropy alloys synthesized via mechanical alloying (2025-03-01)
Synthesis, Microstructures, Mechanical, and Corrosion Behavior of FeMn<sub>(35-<i>x</i>)</sub>-<i>x</i> (Cu, W, and Co)-Based Biodegradable Alloys Prepared by Mechanical Alloying and Selective Laser Melting (2023-07-28)
Synthesis, Microstructures and Mechanical Behaviour of Cr<sub>0.21</sub>Fe<sub>0.20</sub>Al<sub>0.41</sub>Cu<sub>0.18</sub> and Cr<sub>0.14</sub>Fe<sub>0.13</sub>Al<sub>0.26</sub>Cu<sub>0.11</sub>Si<sub>0.25</sub>Zn<sub>0.11</sub> Nanocrystallite Entropy Alloys Prepared by Mechanical Alloying and Hot-Pressing (2020-03-13)
Microstructural Evolutions, Hot Deformation and Work Hardening Behaviour of Novel Al-Zn Binary Alloys Processed by Squeezing and Hot Extrusion (2021-03-25)
Manufacturing Methods, Microstructural and Mechanical Properties Evolutions of High-Entropy Alloys: A Review (2020-08-01)
Effect of Iron, Copper and Heat Treatments on the Microstructure and Tensile Properties of Al-Si-Based Alloys (2021-09-06)
Premium Strength and Optimum Quality in Al-Si-Mg/Al-Si-Mg-Cu Cast Alloys Using Two Different Types of Molds (2021-09-24)
The Influence of Hot Isostatic Pressing on the Fatigue Life of Al-Si-Cu-Mg 354-T6 Casting Alloy (2021-09-20)
Appropriate Heat Treatment Procedures for Improving Strength and Quality Index in 354 Casting Alloys (2021-11-11)
Effect of Ca-Sr-Mg and Bi-Sr-Mg Interactions on the Microstructural Characterization and Tensile Properties of B319 Alloy (2022-01-07)
Synthesis, structure, and mechanical response of Cr<sub>0.26</sub>Fe<sub>0.24</sub>Al<sub>0.5</sub> and Cr<sub>0.15</sub>Fe<sub>0.14</sub>Al <sub>0.30</sub>Cu<sub>0.13</sub>Si<sub>0.28</sub> nanocrystallite entropy alloys (2020-05-01)
Evaluation of the biocompatibility, antibacterial and anticancer effects of a novel nano-structured Fe-Mn-based biodegradable alloys in-vitro study (2023-10-23)
Influence of heating temperature and time on mechanical-degradation, microstructures and corrosion performances of Teflon/granite coated aluminum alloys used for non-stick cookware (2024-07-20)
Microstructural evolutions and enhanced mechanical performance of novel Al-Zn die-casting alloys processed by squeezing and hot extrusion (2021-02-02)
Synthesis, phase evolutions, microstructures, and compaction behavior of four copper-chalcogenide micron-thermoelectric powders (Cu<sub>2</sub>ZnSnS<sub>4</sub>/Se<sub>4</sub>, Cu<sub>2</sub>MnSiS<sub>4</sub>/Se<sub>4</sub>, Cu<sub>2</sub>MnSnS<sub>4</sub>/Se<sub>4</sub>, and Cu<sub>2</sub>ZnSiS<sub>4</sub>/Se<sub>4</sub>) prepared by mechanical alloying (2021-07-08)
Manufacturing of (Al-10Zn)/TiB<sub>2</sub> in-situ nanocomposites by reactive liquid metallurgy and hot-extrusion for enhanced interfacial bonding and mechanical properties (2022-10-29)
Effect of alloying elements on thermal stability of nanocrystalline Al alloys (2021-02-09)
Continuous hot-compaction behavior of nanostructured FeCrCuMnTi-(V, Zn) high-entropy alloys (2021-11-27)
The influence of ball milling processing variables on the microstructure and compaction behavior of Fe-Mn-Cu alloys (2021-09-01)
Investigation of Element Migration from Aluminum Cooking Pots Using ICP-MS (2023-12-01)
Influence of V and Zn in FeCrCuMnTi High-Entropy Alloys on Microstructures and Uniaxial Compaction Behavior Prepared by Mechanical Alloying (2021-11-01)
Investigation of the Microstructure and Compressibility of Biodegradable Fe-Mn-Cu/W/Co Nanostructured Alloy Powders Synthesized by Mechanical Alloying (2021-06-01)
Microstructure, mechanical, impact resistance, and wear behavior of vacuum induction melted Zn-Zr-Ti intermetallic alloys (2026-06-17)
Comparative analysis of regression and enhanced label propagation approaches for predicting airborne dust particle levels in environmental data (vol 17, 103984, 2026) (2026-04-04)
Comparative analysis of regression and enhanced label propagation approaches for predicting airborne dust particle levels in environmental data (2026-02-09)
Effect of the Casting Process on the Microstructure and Tensile Properties of Al-Si-Mg and Al-Cu-Mg-Based Alloys (2026-01-21)
The Concept of Quality Index and Its Application for Al-Si Cast Alloys (2021-01-19)
Nondestructive evaluation of mechanical properties of nanostructured Al-Cu alloy at room and elevated temperatures (2020-01-09)
Effect of FSP parameters and tool geometry on microstructure, hardness, and wear properties of AA7075 with and without reinforcing B<sub>4</sub>C ceramic particles (2019-07-09)
Thermal stability of nanocrystalline Al-10Fe-5Cr bulk alloy (2019-03-16)
Nondestructive measurements of flow properties of nanocrystalline Al-Cu-Ti alloy using Automated Ball Indentation (ABI) technique (2018-08-06)
Effect of Immersion Time and Temperature on Corrosion Behaviour of Nanocrystalline Al-Fe-Cr Alloy (2017-09-28)
Friction stir welding of similar and dissimilar AA7075 and AA5083 (2017-12-25)
Effect of testing temperature on the strength and fracture behavior of Al-B<sub>4</sub>C composites (2016-12-25)
Metallographic investigation of tensile- and impact-tested aluminum composites (2016-12-25)
The Influence of Transition Metals Addition on the Corrosion Resistance of Nanocrystalline Al Alloys Produced by Mechanical Alloying (2016-12-25)
Thermo-mechanical responses of nanocrystalline Al-Fe alloy processed using mechanical alloying and high frequency heat induction sintering (2016-12-25)
On the impact toughness of Al-15 vol.% B<sub>4</sub>C metal matrix composites (2015-12-25)
Corrosion Behavior of Nanostructure Al-Fe Alloy Processed by Mechanical Alloying and High Frequency Induction Heat Sintering (2015-12-25)
A Comparative Study on the Electrochemical Corrosion Behavior of Microcrystalline and Nanocrystalline Aluminum in Natural Seawater (2015-12-25)
On the Impact Toughness of AI-B<sub>4</sub>C MMC: The Role of Minor Additives and Heat Treatment (2015-12-25)
Mechanical properties and fracture of Al-15 vol.-%B<sub>4</sub>C based metal matrix composites (2014-12-25)
Effects of copper and titanium on the corrosion behavior of newly fabricated nanocrystalline aluminum in natural seawater (2014-12-25)
On the Mechanical Properties and Fracture Behavior of Zr and Ti-Containing Al-15vol% B<sub>4</sub>C Based Metal Matrix Composites (2014-12-25)
A New Technology for the Production of Al-B<sub>4</sub>C Metal Matrix Composites (2013-12-25)
Aging behavior of 359-type Al-9% Si-0.5% Mg casting alloys (2012-12-25)
Influence of Aging Parameters on the Tensile Properties and Quality Index of Al-9 Pct Si-1.8 Pct Cu-0.5 Pct Mg 354-Type Casting Alloys (2012-12-25)
EFFECTS OF PHYSICAL PROPERTIES OF ANODE RAW MATERIALS ON THE PASTE COMPACTION BEHAVIOR (2011-12-25)
Effects of Mg-Addition, Sr-Modification and Solidification Rate on the Tensile Properties and Quality Index of 359 Type Al-Si-Mg Casting Alloys (2011-12-25)
Appropriate Heat Treatment Procedures for Improving Strength and Quality Index in 354 Casting Alloys (2010-12-25)
Effects of aging parameters on the quality of 413-type commercial alloys (2009-12-25)
Developing Superior Strength and Optimum Quality in Al-9%Si-0.5%Mg Casting Alloys for Structural Applications (2009-12-25)
Influences of alloying elements, solution treatment time and quenching media on quality indices of 413-type Al-Si casting alloys (2008-12-25)
Porosity and the fatigue behavior of hypoeutectic and hypereutectic aluminum-silicon casting alloys (2008-12-25)
Effect of casting imperfections on the fatigue life of 319-F and A356-T6 Al-Si casting alloys (2008-12-25)
Effects of surface porosity on the fatigue strength of AE425 and PM390 hypereutectic Al-Si casting alloys at medium and elevated temperatures (2008-12-25)
Mechanical behavior of nanostructured bulk aluminum at various temperatures (2019-11-22)
Effect of Al<sub>2</sub>O<sub>3</sub> (x=0, 1, 2, and 3 vol.%) in CrFeCuMnNi-x High-Entropy Alloy Matrix Composites on their Microstructure and Mechanical and Wear Performance (2023-05-11)
Synthesis, Microstructure Investigation, Mechanical and Tribological Behaviour of the AA5083-WC Composite (2023-04-01)
Influence of Oxide Dispersions (Al<sub>2</sub>O<sub>3</sub>, TiO<sub>2</sub>, and Y<sub>2</sub>O<sub>3</sub>) in CrFeCuMnNi High-Entropy Alloy on Microstructural Changes and Corrosion Resistance (2023-04-01)
Developing Improved Corrosion-Resistant AA5083-BN/WC Composites for Tribological Applications (2023-02-01)
Influence of Milling Time and Ball-to-Powder Ratio on Mechanical Behavior of FeMn<sub>30</sub>Cu<sub>5</sub> Biodegradable Alloys Prepared by Mechanical Alloying and Hot-Forging (2022-12-01)

المواد التدريسية